Zepoxy PR Fix

Zepoxy PR Fix

Zepoxy PR Fix is a purpose-built system for manufacturing of Paddle Rackets through hand lay-up method; the viscosity and adhesion of this system ensures good impregnation in carbon fiber and/or glass fiber. It is a quick setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of other composites as well where high impact on the cured surface or the modified surface is expected.

Clear
Add to wishlist
Category

    Zepoxy PR Fix is a purpose-built system for manufacturing of Paddle Rackets through hand lay-up method;
    the viscosity and adhesion of this system ensures good impregnation in carbon fiber and/or glass fiber. It is a quick
    setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of
    time. This material is suitable for manufacturing of other composites as well where high impact on the cured surface or
    the modified surface is expected.

    TECHNICAL DATA

    Property Test Method

    Result

    Part A

    Part B
    Appearance  Visual Medium viscosity, clear to light yellow liquid Low viscosity, yellow to orange liquid
    *Viscosity ASTM D 2196 5000 – 7000 cPs 200 – 500 cPs
    Mix ratio (Part A: Part B) Theoretical

    100:18
    *Pot life @ 30°C (300g mix) –

    15 minutes
    *Peak Exotherm

    –

    170°C
    *Flash Point ASTM D 93

    >135°C
    *Flexural Strength ASTM D 790

    100.5 MPa
    *Compressive Strength – Yield ASTM D 695

    106 MPa
    *Compressive Strength – Ultimate ASTM D 695

    157.5 MPa
    *Gel time @ 30°C of wetted fabric –

    60 mins
    *Gel time @ 110°C of wetted fabric –

    4 mins
    *Gel time @ 140°C of wetted fabric –

    1 mins

     These are typical results under laboratory conditions.

    PAKAGING

    Both Parts of Zepoxy PR Fix A & B are available in the following packs.

    15 KG, 30 KG, and 200 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety
    apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further
    health and safety information

    Packaging

    15 KG, 30 KG, 200 KG
Technical Datasheet
Product Description
Zepoxy PR Fix is a purpose-built system for manufacturing of Paddle Rackets through hand lay-up method; the viscosity and adhesion of this system ensures good impregnation in carbon fiber and/or glass fiber. It is a quick setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of other composites as well where high impact on the cured surface or the modified surface is expected.

TECHNICAL DATA

Property Test Method

Result

Zepoxy PR Fix is a purpose-built system for manufacturing of Paddle Rackets through hand lay-up method; the viscosity and adhesion of this system ensures good impregnation in carbon fiber and/or glass fiber. It is a quick setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of other composites as well where high impact on the cured surface or the modified surface is expected.

TECHNICAL DATA

Property Test Method

Result

Part A

Part B
Appearance  Visual Medium viscosity, clear to light yellow liquid Low viscosity, yellow to orange liquid
*Viscosity ASTM D 2196 5000 - 7000 cPs 200 - 500 cPs
Mix ratio (Part A: Part B) Theoretical

100:18
*Pot life @ 30°C (300g mix) -

15 minutes
*Peak Exotherm

-

170°C
*Flash Point ASTM D 93

>135°C
*Flexural Strength ASTM D 790

100.5 MPa
*Compressive Strength - Yield ASTM D 695

106 MPa
*Compressive Strength - Ultimate ASTM D 695

157.5 MPa
*Gel time @ 30°C of wetted fabric -

60 mins
*Gel time @ 110°C of wetted fabric -

4 mins
*Gel time @ 140°C of wetted fabric -

1 mins
 These are typical results under laboratory conditions.

PAKAGING

Both Parts of Zepoxy PR Fix A & B are available in the following packs. 15 KG, 30 KG, and 200 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information
Shopping Basket
0

Your Quote Request

Subtotal
₨0.00
Apply Coupon
APPLY
To find out your shipping cost , Please proceed to checkout.
Send Quote Request Continue Quote Request