9-z steel 90-01

Zepoxy Steel 90 min

Zepoxy Steel 90 min is a multipurpose moderate setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength and has excellent mechanical strength as well.

Clear
Add to wishlist
Category

    Zepoxy Steel 90 min is a multipurpose moderate setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength and has excellent mechanical strength as well.

    TECHNICAL DATA

    Property Test Method Result
    Appearance Part A Visual High viscosity, black paste
    Appearance Part B Visual High viscosity, grey/white paste
    Mix ratio (Part A: Part B) by weight Theoretical 100: 80
    Mix ratio (Part A: Part B) by volume Theoretical 100: 100
    *Mix viscosity @ 25°C ASTM D 2196 500,000 – 1,000,000 cPs
    *Flash Point ASTM D 93 >150°C
    *Pot life (10g mix) @ 30°C – 20m @ 30⁰C80m @ 30⁰C
    *Gel time (10g mix) @ 30°C – 24 hours
    *Hardening time – 2 hours
    *Full Cure – 7 days

    These are typical results under laboratory conditions.

    AREAS OF APPLICATION

    They include but not limited to:

    • Household repairs
    • Marine
    • Automotive
    • Plumbing
    • Crafts and more.

    NOTE

    At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

    INSTRUCTION OF USE

    Surface should be thoroughly cleaned, free from loose particles like dust, oil, grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 30 mins.

    PAKAGING

    Zepoxy Steel 5 min is available as follows:

    Small Tube Set                10g                          Part A: 5g
                                                                            Part B: 5g

    Medium Tube Set           30g                          Part A: 15g
                                                                            Part B: 15g

    Commercial Pack           2 KG                        Part A: 1 KG
                                                                            Part B: 1 KG

    Bulk pack                        40 KG                       Part A: 20KG                                                                                                                                                                                                                                                                                                                    Part B: 20 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information

    Packaging

    Small Tube Set 10g, Medium Tube Set 30g, Commercial Pack 2 KG, Bulk Pack 40 KG
Technical Datasheet
Product Description

Zepoxy Steel 90 min is a multipurpose moderate setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength and has excellent mechanical strength as well.

Zepoxy Steel 90 min is a multipurpose moderate setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength and has excellent mechanical strength as well.

TECHNICAL DATA

Property Test Method Result
Appearance Part A Visual High viscosity, black paste
Appearance Part B Visual High viscosity, grey/white paste
Mix ratio (Part A: Part B) by weight Theoretical 100: 80
Mix ratio (Part A: Part B) by volume Theoretical 100: 100
*Mix viscosity @ 25°C ASTM D 2196 500,000 – 1,000,000 cPs
*Flash Point ASTM D 93 >150°C
*Pot life (10g mix) @ 30°C - 20m @ 30⁰C80m @ 30⁰C
*Gel time (10g mix) @ 30°C - 24 hours
*Hardening time - 2 hours
*Full Cure - 7 days

These are typical results under laboratory conditions.

AREAS OF APPLICATION

They include but not limited to:

  • Household repairs
  • Marine
  • Automotive
  • Plumbing
  • Crafts and more.

NOTE

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

INSTRUCTION OF USE

Surface should be thoroughly cleaned, free from loose particles like dust, oil, grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 30 mins.

PAKAGING

Zepoxy Steel 5 min is available as follows:

Small Tube Set                10g                          Part A: 5g
                                                                        Part B: 5g

Medium Tube Set           30g                          Part A: 15g
                                                                        Part B: 15g

Commercial Pack           2 KG                        Part A: 1 KG
                                                                        Part B: 1 KG

Bulk pack                        40 KG                       Part A: 20KG                                                                                                                                                                                                                                                                                                                    Part B: 20 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information