Zepoxy Tezz

Zepoxy Tezz is a modified epoxy system recommended for use in low temperature and high humidity environments. It can also be used at normal temperatures as a quick-setting adhesive in various applications.

Clear
Add to wishlist
Category

    Zepoxy Tezz is a modified epoxy system recommended for use in low temperature and high humidity environments. It can also be used at normal temperatures as a quick-setting adhesive in various applications.

    APPLICATION

    • Primers, sealers, and coatings for concrete
    • Anchoring
    • General purpose adhesive
    • Old concrete to new concrete bonding

    ADVANTAGES

    • Excellent adhesion
    • Good toughness and flexibility
    • Good pigment and substrate wetting
    • Low pot life and early hardness development
    • Low temperature and damp environment curing
    • Good chemical resistance

    TECHNICAL DATA

    Property Test Method Result
    Appearance Part A Visual Medium viscosity, clear to light yellow liquid
    Appearance Part B Visual Low viscosity, red liquid
    *Mix Viscosity ASTM D 2196 – 05 2000 – 4000 cps
    *Pot life (300g mass) at 28°C 22 min
    *Gel time (18g mass) at 28°C 60 min
    *Flexural Strength ASTM D 790 41.2 MPa
    *Compressive Strength – Yield ASTM D 695 53.4 MPa
    *Compressive Strength – Ultimate ASTM D 695 87.1 MPa
    *Pull-off Strength (on concrete) ASTM D 4541 >2 MPa (concrete failure)

    These are typical results under laboratory conditions.

    PAKAGING

    Zepoxy Tezz is available as follows:

    Mini set                             180g                             Part A: 100g
                                                                                  Part B: 80g

    Half Set                              900g                             Part A: 500g
                                                                                   Part B: 400g

    Full Set                              1.8 KG                            Part A 1 KG
                                                                                    Part B: 800g

    Commercial Pack              54 KG                           Part A: 30 KG
                                                                                   Part B: 24 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    Mini Set 180g, Half Set 900g, Full Set 1.8 KG, Commercial Pack 54 KG


Product Description

Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy Tezz is a modified epoxy system recommended for use in low temperature and high humidity environments. It can also be used at normal temperatures as a quick-setting adhesive in various applications.

APPLICATION

  • Primers, sealers, and coatings for concrete
  • Anchoring
  • General purpose adhesive
  • Old concrete to new concrete bonding

ADVANTAGES

  • Excellent adhesion
  • Good toughness and flexibility
  • Good pigment and substrate wetting
  • Low pot life and early hardness development
  • Low temperature and damp environment curing
  • Good chemical resistance

TECHNICAL DATA

Property Test Method Result
Appearance Part A Visual Medium viscosity, clear to light yellow liquid
Appearance Part B Visual Low viscosity, red liquid
*Mix Viscosity ASTM D 2196 - 05 2000 – 4000 cps
*Pot life (300g mass) at 28°C - 22 min
*Gel time (18g mass) at 28°C - 60 min
*Flexural Strength ASTM D 790 41.2 MPa
*Compressive Strength – Yield ASTM D 695 53.4 MPa
*Compressive Strength – Ultimate ASTM D 695 87.1 MPa
*Pull-off Strength (on concrete) ASTM D 4541 >2 MPa (concrete failure)
These are typical results under laboratory conditions.

PAKAGING

Zepoxy Tezz is available as follows: Mini set                             180g                             Part A: 100g                                                                               Part B: 80g Half Set                              900g                             Part A: 500g                                                                                Part B: 400g Full Set                              1.8 KG                            Part A 1 KG                                                                                 Part B: 800g Commercial Pack              54 KG                           Part A: 30 KG                                                                                Part B: 24 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.