Zepoxy Electropot Plus
Zepoxy Electro Pot Plus Low viscosity, high gloss, electronic component potting adhesive with long pot life
Product Description
Zepoxy Electro Pot Plus
Low viscosity, high gloss, electronic component potting adhesive with long pot life
Zepoxy Electro Pot Plus
Low viscosity, high gloss, electronic component potting adhesive with long pot life
TECHNICAL DATA
| Property | Test Method | Result |
|---|---|---|
| Appearance Part A | - | Medium viscosity, black liquid |
| Appearance Part B | - | Low viscosity, pale yellow to orange liquid |
| Viscosity @ 25°C Part A | ASTM D 2196-05 | 10,000 – 15,000 |
| Viscosity @ 25°C Part B | ASTM D 2196-05 | 1000 – 2500 |
| Mix ratio (Part A : Part B) | ASTM D 2074 | 100: 23 |
| Pot life (300g mix) @ 30°C | - | > 6h 30m |
| Pot life (300g mix) @ 42°C | - | 5h 45m |
| Gel time (24.6g mix) @ 30°C | - | > 6h 30m |
| Hardening time | - | 24h |
| Mix density @ 30°C | ASTM D 1475-98 | 1.48 g/cc |
These are typical results under laboratory conditions, actual coverage and timings may vary as per actual working environment.
USAGE GUIDELINE
Premix Part A at high speed with a mechanical mixer for 5 minutes, then add Part B and further mix at medium speed for 5 minutes. After pouring the mix in the electronic components, generated foam will finish by itself after some time. Once the epoxy is tack-free, for superior final performance post-cure it at elevated temperature for 2-4 hours.
PAKAGING
Zepoxy Electro Pot Plus is available as follows:
1.23 KG Part A: 1KG
Part B: 230g
24.6 KG Part A: 20KG
Part B: 4.6 KG
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.
