Zepoxy Electropot DT-W

Clear
Add to wishlist
Category

     

    TECHNICAL  TABLE AND TYPICAL PROPERTIES

    Property Test Method Result
    Appearance Part A – High viscosity, White Liquid
    Appearance Part B – Low viscosity, Clear Liquid
    Viscosity @ 25°C Part A ASTM D 2196-05 50,000 – 90,000
    Viscosity @ 25°C Part B ASTM D 2196-05 300 – 600
    Mix ratio (Part A: Part B) ASTM D 2074 100: 25
    Pot life (300g mix) @ 25°C – 50 – 80 min
    Gel time (20g mix) @ 25°C – ≥ 3.5 hour
    Hardening time – 24 hour

    These are typical results under laboratory conditions, actual coverage and timings may vary as per actual working environment.

    USAGE GUIDELINE

    Premix Part A at high speed with a mechanical mixer for 5 minutes, then add Part B and further mix at medium speed for 5 minutes. After pouring the mix in the electronic components, generated foam will finish by itself after some time. Once the epoxy is tack-free, for superior final performance post-cure it at elevated temperature for 2-4 hours.

    PAKAGING

    Zepoxy Electro Pot DT-W is available as follows:

    25 KG Set                 Part A: 20 KG
                                      Part B: 5 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    25 Ltr
Technical Datasheet
Product Description
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

 

TECHNICAL  TABLE AND TYPICAL PROPERTIES

Property Test Method Result
Appearance Part A - High viscosity, White Liquid
Appearance Part B - Low viscosity, Clear Liquid
Viscosity @ 25°C Part A ASTM D 2196-05 50,000 – 90,000
Viscosity @ 25°C Part B ASTM D 2196-05 300 – 600
Mix ratio (Part A: Part B) ASTM D 2074 100: 25
Pot life (300g mix) @ 25°C - 50 – 80 min
Gel time (20g mix) @ 25°C - ≥ 3.5 hour
Hardening time - 24 hour

These are typical results under laboratory conditions, actual coverage and timings may vary as per actual working environment.

USAGE GUIDELINE

Premix Part A at high speed with a mechanical mixer for 5 minutes, then add Part B and further mix at medium speed for 5 minutes. After pouring the mix in the electronic components, generated foam will finish by itself after some time. Once the epoxy is tack-free, for superior final performance post-cure it at elevated temperature for 2-4 hours.

PAKAGING

Zepoxy Electro Pot DT-W is available as follows:

25 KG Set                 Part A: 20 KG
                                  Part B: 5 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.