Zepoxy 600 is an all-purpose high viscosity epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. It has a higher viscosity compared to Zepoxy 150 which gives it even higher tack and solvent-cutting power (in case of coatings), its adhesion and mechanical properties are superior as well.
Zepoxy 600 is an all-purpose high viscosity epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. It has a higher viscosity compared to Zepoxy 150 which gives it even higher tack and solvent-cutting power (in case of coatings), its adhesion and mechanical properties are superior as well.
Zepoxy 600 is an all-purpose high viscosity epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. It has a higher viscosity compared to Zepoxy 150 which gives it even higher tack and solvent-cutting power (in case of coatings), its adhesion and mechanical properties are superior as well.
TECHNICAL DATA
Property
Test Method
Result
Appearance Part A
Visual
Very high viscosity, clear to light yellow liquid
Appearance Part B
Visual
Very high viscosity, yellow to brown liquid
*Mix ratio (Part A: Part B)
Theoretical
100 : 80
*Mix viscosity @ 25°C
ASTM D 2196
100,000 – 300,000 cPs
*Flash Point
ASTM D 93
>135°C
*Pot life (300g mix) @ 30°C
-
30m @ 30⁰C
*Gel time (18g mix) @ 30°C
-
2h @ 30⁰C
*Hardening time
-
24 hours
*Full Cure
-
7 days
*Flexural Strength
ASTM D 790
48.7 MPa
*Compressive Strength – Yield
ASTM D 790
61.3 MPa
*Compressive Strength – Ultimate
ASTM D 695
107.5 MPa
These are typical results under laboratory conditions.
NOTE
At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.
