Zepoxy 300
Zepoxy 300 is a clear high gloss epoxy system for general purpose coatings and thin castings. This system offers a moderate open time, medium viscosity, good wetting characteristics and good impact strength.
Product Description
Zepoxy 300 is a clear high gloss epoxy system for general purpose coatings and thin castings. This system offers a moderate open time, medium viscosity, good wetting characteristics and good impact strength.
Zepoxy 300 is a clear high gloss epoxy system for general purpose coatings and thin castings. This system offers a moderate open time, medium viscosity, good wetting characteristics and good impact strength.
TECHNICAL DATA
| Property | Test Method | Result |
|---|---|---|
| Appearance Part A | Visual | Medium viscosity, clear liquid |
| Appearance Part B | Visual | Low viscosity, clear liquid |
| Mix ratio (Part A: Part B) | Theoretical | 100: 50 |
| *Mix viscosity @ 25°C | ASTM D 2196 | 1000 – 5000 cPs |
| *Flash Point | ASTM D 93 | >117°C |
| *Coverage per kg | Theoretical | 9 SFT @ 1mm thick |
| Recommended maximum casting thickness | - | 5mm |
| *Pot life (300g mix) @ 30°C | - | 38 min |
| *Pot life (300g mix) @ 45°C | - | 24 min |
| *Gel time @ 34°C (1mm thickness) | - | 50m |
| *Hardening time | - | 24 hours |
| *Full Cure | - | 7 days |
| *Flexural Strength (MPa) | ASTM D 790 | 82.2 |
| *Compressive Strength (MPa) | ASTM D 695 | 81.7 |
These are typical results under laboratory conditions.
NOTE
At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.
MIXING
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin. The mixed components should be thoroughly mixed for 3-4 minutes to ensure an even consistency. To avoid the development of bubbles slowly mix for 5-10 mins. Once the epoxy is mixed and poured gently pass warm air from a heat gun or hairdryer on slowest speed setting, this will assist in removal of any bubbles generated during mixing.
PAKAGING
Zepoxy 300 is available as follows:
1.5 KG Sets Part A 1 KG
Part B 500g
15 KG Sets Part A 10 KG
Part B 5 KG
45 KG Sets Part A 30 KG
Part B 15 KG
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.
Epoxy Resin Art
With the help of Ressichem’s Epoxy resin art, you can create a unique painting style and dynamic patterns that matches your creativity. We offer crystal clear and low viscosity epoxy resin art material, which can improve the leveling. Our crystal clear epoxy resin art also helps in improving the compressive strengths.
Epoxy Resin Art Manufacturers in Pakistan
We are leading the top epoxy resin art manufacturers that offer cost-effective, high-performance, and durable materials. It is resistant to impacts, water, UV lights, acid, and other chemicals. Hence, it gives a unique glossy finishing look and can be permeated easily.
Epoxy Resin Art Materials Supplies in Pakistan
Epoxy resin art material is a versatile medium used for creating stunning artwork. It combines epoxy resin, a durable and glossy substance, with pigments, additives, and tools. This dynamic blend allows artists to craft mesmerizing epoxy resin art to create endless creative possibilities. Get resin art supplies in Pakistan from Ressichem.
