Zepoxy Steel Crystal

Zepoxy Crystal is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C

Clear
Add to wishlist
Category

    Zepoxy Crystal is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

    TECHNICAL DATA

    PropertyTest MethodResult
    Appearance Part AVisualHigh viscosity, black paste
    Appearance Part BVisualHigh viscosity, grey paste
    Mix ratio (Part A: Part B) Theoretical100: 80
    *Mix viscosity @ 25°CTheoretical100: 100
    *Flash PointASTM D 2196500,000 – 1,000,000 cPs
    *Pot life (300g mix) @ 30°CASTM D 93>150°C
    *Gel time (10g mix) @ 30°C3m @ 30⁰C
    *Hardening time2 hours
    *Full Cure2 days

    Th0ese are typical results under laboratory conditions.

    NOTE

    At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

    AREAS OF APPLICATION

    They include but not limited to:

    • Tiles
    • Glass
    • Most plastics
    • Ceramics
    • Wood

    INSTRUCTION OF USE

    Surface should be thoroughly cleaned, free from loose particles like dust, oil, grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 2 mins.

    PAKAGING

    Zepoxy Steel 5 min is available as follows:

    Small Tube Set                10g                          Part A: 5g
                                                                            Part B: 5g

    Medium Tube Set          30g                           Part A: 15g
                                                                             Part B: 15g         

    Commercial Pack          2 KG                           Part A: 1 KG
                                                                             Part B: 1 KG

    Bulk pack                        40 KG                        Part A: 20KG            Part B: 20 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    Small Tube Set 10g, Medium Tube Set 30g, Commercial Pack 2 KG, Bulk Pack 40 KG


Product Description

Zepoxy Crystal is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

Zepoxy Crystal is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

TECHNICAL DATA

PropertyTest MethodResult
Appearance Part AVisualHigh viscosity, black paste
Appearance Part BVisualHigh viscosity, grey paste
Mix ratio (Part A: Part B) Theoretical100: 80
*Mix viscosity @ 25°CTheoretical100: 100
*Flash PointASTM D 2196500,000 – 1,000,000 cPs
*Pot life (300g mix) @ 30°CASTM D 93>150°C
*Gel time (10g mix) @ 30°C-3m @ 30⁰C
*Hardening time-2 hours
*Full Cure-2 days

Th0ese are typical results under laboratory conditions.

NOTE

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

AREAS OF APPLICATION

They include but not limited to:

  • Tiles
  • Glass
  • Most plastics
  • Ceramics
  • Wood

INSTRUCTION OF USE

Surface should be thoroughly cleaned, free from loose particles like dust, oil, grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 2 mins.

PAKAGING

Zepoxy Steel 5 min is available as follows:

Small Tube Set                10g                          Part A: 5g
                                                                        Part B: 5g

Medium Tube Set          30g                           Part A: 15g
                                                                         Part B: 15g         

Commercial Pack          2 KG                           Part A: 1 KG
                                                                         Part B: 1 KG

Bulk pack                        40 KG                        Part A: 20KG            Part B: 20 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

Best Epoxy for Plastic Repair

We offer the best epoxy glue for plastic that forms strong and invisible bonds between plastic and other surfaces including metal, glass, and wood. However, it is a quick setting epoxy that dries promptly and gives the excellent bonding strength. It is commonly used for metal repairs, automotive repairs, and eliminates the need for welding and brazing.

Strongest Epoxy for Plastic

At Ressichem, we offer highly versatile putty for plastic that is retarded for its strength and fast cured time. It is the best epoxy for plastic repair that has a high resistance to impact, vibration, and temperature changes, making it suitable for hard plastic in industrial and commercial purposes. It is important to avoid applying too much epoxy resin for plastic, as the excessive amount of adhesive being squeezed out and begin the mess.