zepoxy marble seal-01

Zepoxy Marble Seal

Zepoxy Marble Seal is a high gloss and high UV resistance purpose-built system for top coating of natural stones, especially light-colored marbles, slates, and granites. It has a low viscosity and a moderate curing rate suitable for excellent impregnation in the marble and then high level of curing in that state. Marble and granite reinforced with Zepoxy Marble Seal show good resistance to yellowing, chemicals and staining, and additionally the epoxy matrix provides it high gloss and strength.

Clear
Add to wishlist
Category

    Zepoxy Marble Seal is a high gloss and high UV resistance purpose-built system for top coating of natural stones, especially light-colored marbles, slates, and granites. It has a low viscosity and a moderate curing rate suitable for excellent impregnation in the marble and then high level of curing in that state. Marble and granite reinforced with Zepoxy Marble Seal show good resistance to yellowing, chemicals and staining, and additionally the epoxy matrix provides it high gloss and strength.

    TECHNICAL DATA

    Property Test Method Result
    Appearance Part A Visual Low viscosity, clear liquid
    Appearance Part B Visual Low viscosity, clear liquid
    Mix ratio (Part A : Part B) Theoretical 100 : 35
    Mix viscosity @ 25°C ASTM D 2196 <1000 cPs
    Flash Point ASTM D 93 >117°C
    Pot life (300g mix) @ 30°C – 27m @ 30⁰C
    Gel time (18g mix) @ 30°C – 1h 45m @ 28⁰C
    Hardening time – 24 hours
    Full Cure – 7 days

    These are typical results under laboratory conditions.

    NOTE:

    At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

    PAKAGING

    Zepoxy Marble Seal is available as follows:

    1.35 KG Set                                  Part A: 1 KG
    Part B: 350g

    13.5 KG Set                                 Part A: 10 KG
    Part B: 3.5 KG

    40.5 KG Set                                 Part A: 30 KG
    Part B: 10.5 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    1.35 KG, 13.5 KG, 40.5 KG
Technical Datasheet
Product Description
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy Marble Seal is a high gloss and high UV resistance purpose-built system for top coating of natural stones, especially light-colored marbles, slates, and granites. It has a low viscosity and a moderate curing rate suitable for excellent impregnation in the marble and then high level of curing in that state. Marble and granite reinforced with Zepoxy Marble Seal show good resistance to yellowing, chemicals and staining, and additionally the epoxy matrix provides it high gloss and strength.

TECHNICAL DATA

Property Test Method Result
Appearance Part A Visual Low viscosity, clear liquid
Appearance Part B Visual Low viscosity, clear liquid
Mix ratio (Part A : Part B) Theoretical 100 : 35
Mix viscosity @ 25°C ASTM D 2196 <1000 cPs
Flash Point ASTM D 93 >117°C
Pot life (300g mix) @ 30°C - 27m @ 30⁰C
Gel time (18g mix) @ 30°C - 1h 45m @ 28⁰C
Hardening time - 24 hours
Full Cure - 7 days
These are typical results under laboratory conditions.

NOTE:

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

PAKAGING

Zepoxy Marble Seal is available as follows: 1.35 KG Set                                  Part A: 1 KG Part B: 350g 13.5 KG Set                                 Part A: 10 KG Part B: 3.5 KG 40.5 KG Set                                 Part A: 30 KG Part B: 10.5 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.