Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.
Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.
ADVANTAGES of Silprime 3K
Outstanding adhesion, even to moist and marginally pretreated steel
Good surface aspect, even under adverse conditions
Chemical resistance is perfectly adequate for primers, decorative coatings, and for heavy duty protection against atmospheric corrosion.
TECHNICAL DATA
Component
Three: Part A: Base Part B: Hardener Part C: Hardener
Mixing Ratio
Part A: 0.82 Part B: 0.29 Part C: 0.14
Mixed Form
Liquid
Pot Life
35 mins ± 10 mins
Gel Time
70 mins ± 10 mins
Drying time
4 to 5 hours
Full Cure
7 Days
Bond Strength
1.5 N / mm2
Application temperature
+5°C to +40°C
Service Temperature
+5°C to +70°C
*Typical Results under laboratory conditions
MIX RATIO
The optimum mix ratio of Silprime 3K (Part A and B) is 100:60 parts by weight. Part C is used as diluent as and when required.
USAGE RATES
For standard Metal surface 200-300 g/m2 as primer
2 X 350 g/m2 as surface applied damp proof membrane
Metal and wood as indoor durable coatings
A film of minimum 100 micron is recommended
SHELF LIFE
Expiration of Silprime 3K is at 6 months after production date under dry and sheltered conditions.
PACKAGING
Silprime 3K is available in 1.25 KG Kits. Part A: 820gm Part B: 290gm Part C: 140gm (Diluent)
HEALTH & SAFETY
Silprime 3K is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.