Ressi TG CR High Gloss is a 2-component solvent free epoxy-based tile grout based on high grade Resins. It provides excellent chemical resistance, anti-fungal, anti-bacterial and dust proofing properties. Ressi TG CR High Gloss is suitable for the tile joint grouting in Industries where heavy chemical use prevails. This is an ideal product that can be used in hospitals, kitchens, chemical spillage rooms, laboratories, etc.
Ressi TG CR High Gloss is a 2-component solvent free epoxy-based tile grout based on high grade Resins. It provides excellent chemical resistance, anti-fungal, anti-bacterial and dust proofing properties. Ressi TG CR High Gloss is suitable for the tile joint grouting in Industries where heavy chemical use prevails. This is an ideal product that can be used in hospitals, kitchens, chemical spillage rooms, laboratories, etc.
Ressi TG CR High Gloss is a 2-component solvent free epoxy-based tile grout based on high grade Resins. It provides excellent chemical resistance, anti-fungal, anti-bacterial and dust proofing properties. Ressi TG CR High Gloss is suitable for the tile joint grouting in Industries where heavy chemical use prevails. This is an ideal product that can be used in hospitals, kitchens, chemical spillage rooms, laboratories, etc.
ADVANTAGES of Ressi TG CR High Gloss
Excellent resistance to bacterial and fungal growth
Solvent free
Shrinkage free and rapid hardening
High mechanical strength
Curing is not affected by high humidity.
Impact and vibration resistant
Excellent adhesion
Mild chemical resistance
TYPICAL PROPERTIES25°C
Component
Two: Part A: Base Part B: Hardener
Mixed Form
Pourable Paste
Color
Various Colors Available: Refer to Shade Card
Mixed Density
1.9 KG / Ltr ± 0.05
*Open Time
30 Mins
*Full Cure
7 Days
*Compressive Strength
75 N / mm2 @ 7 Days (Tested as per BS EN 6319-2)
*Tensile Strength
15 N / mm2 @ 7 Days (Tested as per BS EN 6319-2)
*Initial Shear Adhesion Strength
> 2 N / mm2 @ 7 Days (In house Developed Method)
*Flexural Strength
30 N / mm2 @ 7 Days (Tested as per BS EN 6319-3)
*Chemical Resistance
Please refer to chemical resistance chart provided.
*Typical Results under laboratory conditions
SURFACE PREPARATION
Joints to receive grout should be clean, dry, and free from standing water, grease, loosely adhering particles etc. cement laitance should be removed by mechanical means. All the areas surrounding the joints must be taped thoroughly. Ressi TG CR High Gloss is a pourable tile grout, taping should be done with the most care as cleaning this material from various tile surfaces is difficult and can also damage the tiles.
MIXING
Mix part A with Part B using a slow speed drill machine fitted with a mixing paddle and continue to mix until a uniform consistency is achieved.
APPLICATION
Mixed Ressi TG CR High gloss should be worked into the tile joints using a spatula. It is recommended to use masking tape around the edges of the tiles to avoid any spillage. Excess grout material can be removed with the use of a cloth or sponge along with a suitable solvent while the material is still wet and has not cured completely.
CHEMICAL RESISTIVITY CHART
Chemical
Resistance
Acetic Acid 99%
NR
Acetic Acid 33%
1 day
HBr 47%
Excellent
HCl 12%
Excellent
Nitric Acid 57%
NR
Nitric Acid 19%
Excellent
Sulfuric Acid 98%
NR
Sulfuric Acid 33%
Excellent
ECH 50% in water
NR
DETA 50% in water
1 day
Toluene
Excellent
Petrol
Excellent
Lactic Acid
Good
Sodium Hydroxide 50%
Excellent
Water at 70⁰C
Excellent
Sodium Chloride 30%
Excellent
Methanol
NR
MEK
NR
MIBK
Excellent
Key: Excellent: < 5% 80-day mass change Good: 5-10% 80-day mass change 1-day: < 10% 1-day mass change No Resistance: > 10 % 1-day mass change
*This is a tentative chart for reference only. It is recommended to do a compatibility test and sampling prior to any application.
COVERAGE
Tile size (W X B)
mm
Tile thickness
mm
Joint Width
mm
Grout consumption
Ltr /m2
200 X 200
6
5
*0.370
455 X 500
6
5
*0.170
*Figures are theoretical values only. Allowance for wastage should be considered.
SHELF LIFE
Expiration of Ressi TG CR High Gloss is at 12 months after production date under dry and sheltered conditions.
PACKAGING
Ressi TG CR High Gloss is available in the following packaging.
1.4 KG Kits Part A: 1 KG Part B: 400g
NOTE
If printed box not available, neutral box with label. Lot number and manufacturing date to be stamped at the back of each box.
HEALTH AND SAFETY
Ressi TG CR High Gloss is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.
NOTE
Ressi TG CR High Gloss is available in many standard different colors. Please Refer to the product shade card for color reference. Please note that the colors presented in the shade cards are for reference, the color shade may vary with the difference in the application and methodology along with the production availability of pigments at source. The coverage presented in the Technical data sheet is theoretical. Place an actual area on site to check for the coverage and color outcome on the job site.