Ressi KerbFix 101
Ressi Kerbfix 101 is a cement based ready to use just add water curb stone adhesive used for the laying of curb stones and making pathways and road walkways. Its’ water-resistant nature and easy to use properties make it the most ideal and economical solution for the laying of curb stones for commercial and industrial projects.
Ressi Kerbfix 101
Ressi Kerbfix 101 is a cement based ready to use just add water curb stone adhesive used for the
laying of curb stones and making pathways and road walkways. Its’ water-resistant nature and easy
to use properties make it the most ideal and economical solution for the laying of curb stones for
commercial and industrial projects.
ADVANTAGES
- Ready to use.
- Water resistant.
- Easy application.
- Can be left bare or covered.
- Saves space (No dumping of sand and cement on site).
- Accurate cement content (No Dosage error).
- Consistent strength (No Batch error).
- Durable.
- Good adhesion with concrete surface, and other curb stones.
- Saves time (No site mix).
SURFACE PREPARATION
Ensure that the curb stones are clean and free from any grease, oil, dust or any materials that may
cause debonding. It is strongly recommended to avoid humidity arising on the base concrete or the
foundation where this material is to be used. It is also recommended that the base should be
protected by using a suitable waterproofing system recommended by Ressichem.
PRODUCT PREPARATION
For proper mixing it is important that water is premeasured in accordance with the amount of material
used. The mortar powder should be added over the water to avoid the settlement of the material at the
bottom of the mixing container. The mixing container should be uncontaminated, non-corrosive and
clean. Only potable water should be used for mixing. It is also recommended that the material should
be mechanically mixed with a mortar mixer or any other mechanical mixing methods to obtain a lump
free mix.
APPLICATION
The correct alignment of the curbstones is of the utmost importance and it must be ensured. Using
appropriate tools ensure that the curb stones are correctly aligned. Remove excess mortar prior to
hardening.
TECHNICAL DATA
| Appearance |
Grey Powder |
| Composition |
Contains Cement and selected aggregates along with additives to improve consistency, workability, and durability. |
| Maximum Aggregate size |
2.00 mm |
| Water application |
20% ± 5% |
| *Wet Mix Life |
Tested as per BSEN 1015-9
Approximately < 45 minutes @ 20°C |
| *Compressive Strength 1 |
Tested as per BS EN 1015-11
28 Days 7.00 N/mm2 |
| *Flexural Strength |
Tested as per BS EN 1015-11
28 Days 1.00 N/mm2 |
| *Appropriate Yield / Coverage |
0.65 m3/T |
*Typical results under laboratory conditions
1 These results comply with BS EN 998-2 Class (M5)
CURING
No curing required in general, however a maximum curing of 72 hours is recommended where
temperatures exceed 40°C.
SHELF LIFE
Expiration of Ressi Kerbfix 101 is at 6 months after production date under dry and sheltered conditions.
PACKAGING
Ressi Kerbfix 101 is available in 20 KG Bags.
HEALTH AND SAFETY
Ressi Kerbfix 101 is regarded as non-hazardous for transportation. Do not reuse bags or containers and
dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during
application.
NOTE:
If printed packaging not available, neutral packaging with label. Lot number and manufacturing
date to be stamped at the back of each packaging.
