Zepoxy 100 is an all-purpose epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. Its long pot life and non-corrosive nature combined with its high level of curing and hardness development even in low temperature, humid environments make this epoxy adhesive an extremely versatile material for a variety of applications. This system has the additional benefit of a light-colored hardener and a 2-year shelf life.
Zepoxy 100 is an all-purpose epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. Its long pot life and non-corrosive nature combined with its high level of curing and hardness development even in low temperature, humid environments make this epoxy adhesive an extremely versatile material for a variety of applications. This system has the additional benefit of a light-colored hardener and a 2-year shelf life.
Zepoxy 100 is an all-purpose epoxy adhesive useful for bonding of materials such as metal, wood, ceramic, concrete, textile, glass, leather, etc. Its long pot life and non-corrosive nature combined with its high level of curing and hardness development even in low temperature, humid environments make this epoxy adhesive an extremely versatile material for a variety of applications. This system has the additional benefit of a light-colored hardener and a 2-year shelf life
TECHNICAL DATA
Property
Test Method
Result
Appearance Part A
Visual
Medium viscosity, clear to light yellow liquid
Appearance Part B
Visual
Medium viscosity, yellow to brown liquid
*Mix ratio (Part A: Part B)
Theoretical
100: 80
*Mix viscosity @ 25°C
ASTM D 2196
8000 – 13000 cPs
*Flash Point
ASTM D 93
>135°C
*Pot life (300g mix) @ 30°C
-
43m @ 30⁰C
*Gel time (18g mix) @ 30°C
-
2h 45m @ 30⁰C
*Hardening time
-
24 hours
*Full Cure
-
7 days
These are typical results under laboratory conditions.
CURED SYSTEM PROPERTIES
Property
Test Method
Result
7 days
2h@80°C
*Flexural Strength
ASTM D 790
69 MPa
60 MPa
Compressive Strength - Ultimate
ASTM D 695
85 MPa
150 MPa
These are typical results under laboratory conditions.
NOTE:
At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.
PAKAGING
Zepoxy 100 is available as follows:
Mini set 180g Part A: 100g Part B: 80g
Half Set 900g Part A: 500g Part B: 400g
Full Set 1.8 KG Part A 1 KG Part B: 800g
Commercial Pack 54 KG Part A: 30 KG Part B: 24 KG
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.