Ressi SBR 5840

Ressi SBR 5840

Ressi SBR 5840 is a ready-for use aqueous dispersion of a styrene-butadiene co-polymer with stability against electrolytes. It contains anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5840 is primarily designed to meet cost constraints of projects. It is a dilution of pure SBR emulsion in water modified with a thickener.  

Clear
Add to wishlist
Category

    Ressi SBR 5840 is ready for use aqueous dispersion of a styrene-butadiene co-polymer with stability against electrolytes. It contains an anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5840 is primarily designed to meet the cost constraints of projects. It is a dilution of pure SBR emulsion in water modified with a thickener.

    ADVANTAGES of Ressi SBR 5840

    • Improves tensile and flexural strength of mixes.
    • Helps in reducing attack by aggressive elements by reducing porosity.
    • Compatible with all types of cement
    • Prolonged corrosion protection
    • Reduces shrinkage.
    • Suitable for internal and external applications in conjunction with cement
    • Non-Toxic.

    TECHNICAL DATA

    Property Value Unit
    Solid Content NA (As diluted as per requirement) %
    pH Value 8 –
    Viscosity NA (As diluted as per requirement) mPas
    Glass transition Material mPas °C
    Density 1.01 ± 0.2 G / cm3
    Mean Particle size 0.15 µm
    Minimum film forming temperature < 3 °C
    Surface tension NA (As diluted as per requirement) N / mm2
    Tensile strength NA (As diluted as per requirement) N / mm2
    Elongation at break NA (As diluted as per requirement) %

    *Typical Results under laboratory conditions 

    PRODUCT  APPLICATION

    As a Bonding slurry Coat: As per recommended dosage, Add Ressi SBR 5840 to premeasured quantity of water in a suitable container and stir well. Add cement slowly and mix well using a slow speed drill machine fitted with a paddle mixer. 
    As an Additive: It is recommended that a forced action mixer or a low-speed drill fitted with a paddle should be used. Weigh the cement and sand where required into the mixer and dry blend together for one minute. With the machine in operation, add the premixed Ressi SBR 5840 and clean water. Continue mixing for 3 munities to ensure complete dispersal into the sand cement mix. Make any small adjustment to the quantity of clean water but do not significantly exceed the dosage shown below. Mix until homogenous material is obtained.

    COVERAGE

    As a neat bonding agent: 5-7 m²/ Ltr/Coat. Actual coverage depends on texture and porosity of substrate. As an additive for the tile adhesives, bedding mortars, Sand-cement renders, plasters and screeds, the dosage may vary from 10 to 20% by weight of cement. If incorporated in a mix design, the recommended mix design should be followed for optimum result.

    PACK SIZE

    Ressi SBR 5840 is available in the following packaging:
    1 KG, 5 KG, 15 KG, 25 KG, 200 KG and 1000 KG Containers.

    PRODUCT PRESERVATION

    Ressi SBR 5840 is preserved against bacterial and fungal attack. In the manufacture of finished product, the material must be retreated, as usual, with suitable biocides to give enhanced preservation..

    SHELF LIFE

    12 months from the date of manufacture when stored under warehouse conditions in original unopened packing. Extreme temperature/humidity may reduce shelf life.

    CLEANING

    Clean all equipment and tools with water immediately after use. Hardened material can be removed mechanically.

    HEALTH & SAFETY

    Ressi SBR 5840 is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

    Packaging

    1 KG, 5 KG, 10 KG, 15 KG, 25 KG, 200 KG, 1000 KG
Technical Datasheet
Product Description

Ressi SBR 5840 is ready for use aqueous dispersion of a styrene-butadiene co-polymer with stability against electrolytes. It contains an anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5840 is primarily designed to meet the cost constraints of projects. It is a dilution of pure SBR emulsion in water modified with a thickener.

Ressi SBR 5840 is ready for use aqueous dispersion of a styrene-butadiene co-polymer with stability against electrolytes. It contains an anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5840 is primarily designed to meet the cost constraints of projects. It is a dilution of pure SBR emulsion in water modified with a thickener.

ADVANTAGES of Ressi SBR 5840

  • Improves tensile and flexural strength of mixes.
  • Helps in reducing attack by aggressive elements by reducing porosity.
  • Compatible with all types of cement
  • Prolonged corrosion protection
  • Reduces shrinkage.
  • Suitable for internal and external applications in conjunction with cement
  • Non-Toxic.

TECHNICAL DATA

Property Value Unit
Solid Content NA (As diluted as per requirement) %
pH Value 8 -
Viscosity NA (As diluted as per requirement) mPas
Glass transition Material mPas °C
Density 1.01 ± 0.2 G / cm3
Mean Particle size 0.15 µm
Minimum film forming temperature < 3 °C
Surface tension NA (As diluted as per requirement) N / mm2
Tensile strength NA (As diluted as per requirement) N / mm2
Elongation at break NA (As diluted as per requirement) %

*Typical Results under laboratory conditions 

PRODUCT  APPLICATION

As a Bonding slurry Coat: As per recommended dosage, Add Ressi SBR 5840 to premeasured quantity of water in a suitable container and stir well. Add cement slowly and mix well using a slow speed drill machine fitted with a paddle mixer. 
As an Additive: It is recommended that a forced action mixer or a low-speed drill fitted with a paddle should be used. Weigh the cement and sand where required into the mixer and dry blend together for one minute. With the machine in operation, add the premixed Ressi SBR 5840 and clean water. Continue mixing for 3 munities to ensure complete dispersal into the sand cement mix. Make any small adjustment to the quantity of clean water but do not significantly exceed the dosage shown below. Mix until homogenous material is obtained.

COVERAGE

As a neat bonding agent: 5-7 m²/ Ltr/Coat. Actual coverage depends on texture and porosity of substrate. As an additive for the tile adhesives, bedding mortars, Sand-cement renders, plasters and screeds, the dosage may vary from 10 to 20% by weight of cement. If incorporated in a mix design, the recommended mix design should be followed for optimum result.

PACK SIZE

Ressi SBR 5840 is available in the following packaging:
1 KG, 5 KG, 15 KG, 25 KG, 200 KG and 1000 KG Containers.

PRODUCT PRESERVATION

Ressi SBR 5840 is preserved against bacterial and fungal attack. In the manufacture of finished product, the material must be retreated, as usual, with suitable biocides to give enhanced preservation..

SHELF LIFE

12 months from the date of manufacture when stored under warehouse conditions in original unopened packing. Extreme temperature/humidity may reduce shelf life.

CLEANING

Clean all equipment and tools with water immediately after use. Hardened material can be removed mechanically.

HEALTH & SAFETY

Ressi SBR 5840 is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.