Zepoxy LPES

Zepoxy LPES (Laminate Production Epoxy System) is a purpose-built system for manufacturing of Laminates through hand lay-up method; the low viscosity, long pot life and high adhesion of this system ensures excellent impregnation in carbon fiber and/or glass fiber. It is a moderate setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of all composites where high impact on the cured surface or the modified surface is expected.

Clear
Add to wishlist
Category

    Zepoxy LPES (Laminate Production Epoxy System) is a purpose-built system for manufacturing of Laminates through hand lay-up method; the low viscosity, long pot life and high adhesion of this system ensures excellent impregnation in carbon fiber and/or glass fiber. It is a moderate setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of all composites where high impact on the cured surface or the modified surface is expected.

    TECHNICAL DATA

    Property Test Method

    Result

    Part A

    Part B
    Appearance Visual Low viscosity, clear to light yellow liquid Low viscosity, yellow to orange liquid
    *Viscosity ASTM D 2196 1500 – 3000 cPs 200 – 500 cPs
    Mix ratio (Part A: Part B) Theoretical 100:30
    *Pot life @ 30°C (300g mix) – 50 minutes
    *Peak Exotherm – 185°C
    *Flash Point ASTM D 93 >121°C

    These are typical results under laboratory conditions

    PAKAGING

    Zepoxy LPES Part A & Part B are available in the following packaging.

    15 KG, 30 KG, and 200 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    15 KG, 30 KG, 200 KG
Technical Datasheet
Product Description

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

Zepoxy LPES (Laminate Production Epoxy System) is a purpose-built system for manufacturing of Laminates through hand lay-up method; the low viscosity, long pot life and high adhesion of this system ensures excellent impregnation in carbon fiber and/or glass fiber. It is a moderate setting high strength material which can be heat cured to achieve optimum mechanical properties in a short amount of time. This material is suitable for manufacturing of all composites where high impact on the cured surface or the modified surface is expected.

TECHNICAL DATA

Property Test Method

Result

Part A

Part B
Appearance Visual Low viscosity, clear to light yellow liquid Low viscosity, yellow to orange liquid
*Viscosity ASTM D 2196 1500 - 3000 cPs 200 - 500 cPs
Mix ratio (Part A: Part B) Theoretical 100:30
*Pot life @ 30°C (300g mix) - 50 minutes
*Peak Exotherm - 185°C
*Flash Point ASTM D 93 >121°C
These are typical results under laboratory conditions

PAKAGING

Zepoxy LPES Part A & Part B are available in the following packaging. 15 KG, 30 KG, and 200 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.