Water Guard L 100

Water Guard L 100

Water Guard L 100 is a high solids aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Water Guard L 100 is specifically designed to be mixed with Ordinary Portland cement to achieve a thick paste form liquid to be used as a brush applied coat to achieve watertight properties for concrete, plaster, block, and static cementitious surfaces.

Clear
Add to wishlist
Category

    Water Guard L 100 is a high solids aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Water Guard L 100 is specifically designed to be mixed with Ordinary Portland cement to achieve a thick paste form liquid to be used as a brush applied coat to achieve watertight properties for concrete, plaster, block, and static cementitious surfaces.

    TECHNICAL DATA

    Solid Content 57%                                    
    pH Value 8.0
    Viscosity 350 mPas
    Glass Transition Temperature -11°C
    Density 1.04 g / cm3
    Mean particle size 0.4 µm
    Minimum Film forming temperature 0°C
    Surface Tension 40 mN/m

    *Typical Results under laboratory conditions 

    APPLICATION 

    The above minimum film forming temperature of Water Guard L 100 forms a clear tacky film. Water Guard L 100 is a soft styrene acrylic dispersion exhibiting good compatibility with cement for use as elastomeric component in cementitious mortars. Water Guard L 100 is especially predestinated for use as a cement additive to form waterproof membranes.

    RECOMMENDED DOSAGE

    It is recommended to use 1 part Water Guard L 100 and 2 Parts cement. The Ratio can be adjusted, and water can be added according to the properties required in the mixed slurry form. Increasing the polymer liquid in the ratio will improve the flexibility and waterproofing properties of the mix.

    PACK  SIZE

    Water Guard L 100 is available in the following packaging:
    1 KG, 5 KG, 10 KG, 15 KG, 25KG, 200 KG, and 1000 KG.

    SHELF LIFE

    12 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.

    HEALTH & SAFETY

    Water Guard L 100 is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

    Packaging

    1 KG, 5 KG, 10 KG, 15 KG, 25 KG, 200 KG, 1000 KG
Technical Datasheet
Product Description

Water Guard L 100 is a high solids aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Water Guard L 100 is specifically designed to be mixed with Ordinary Portland cement to achieve a thick paste form liquid to be used as a brush applied coat to achieve watertight properties for concrete, plaster, block, and static cementitious surfaces.

Water Guard L 100 is a high solids aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Water Guard L 100 is specifically designed to be mixed with Ordinary Portland cement to achieve a thick paste form liquid to be used as a brush applied coat to achieve watertight properties for concrete, plaster, block, and static cementitious surfaces.

TECHNICAL DATA

Solid Content 57%                                    
pH Value 8.0
Viscosity 350 mPas
Glass Transition Temperature -11°C
Density 1.04 g / cm3
Mean particle size 0.4 µm
Minimum Film forming temperature 0°C
Surface Tension 40 mN/m

*Typical Results under laboratory conditions 

APPLICATION 

The above minimum film forming temperature of Water Guard L 100 forms a clear tacky film. Water Guard L 100 is a soft styrene acrylic dispersion exhibiting good compatibility with cement for use as elastomeric component in cementitious mortars. Water Guard L 100 is especially predestinated for use as a cement additive to form waterproof membranes.

RECOMMENDED DOSAGE

It is recommended to use 1 part Water Guard L 100 and 2 Parts cement. The Ratio can be adjusted, and water can be added according to the properties required in the mixed slurry form. Increasing the polymer liquid in the ratio will improve the flexibility and waterproofing properties of the mix.

PACK  SIZE

Water Guard L 100 is available in the following packaging:
1 KG, 5 KG, 10 KG, 15 KG, 25KG, 200 KG, and 1000 KG.

SHELF LIFE

12 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.

HEALTH & SAFETY

Water Guard L 100 is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.