Zepoxy REH 7270 is low viscosity polyamine hardener suitable to cure at ambient temperature. It is highly reactive and should not be used in excess of the recommended mixing ratio. It is sensitive to the humidity and hence must always be stored in tightly closed containers. When systems based on this are fully cured, they possess excellent electrical insulation properties and high mechanical strength. It provides good adhesion to a variety of low surface energy substrates and consequently excellent protection.
Zepoxy REH 7270 is low viscosity polyamine hardener suitable to cure at ambient temperature. It is highly reactive and should not be used in excess of the recommended mixing ratio. It is sensitive to the humidity and hence must always be stored in tightly closed containers. When systems based on this are fully cured, they possess excellent electrical insulation properties and high mechanical strength. It provides good adhesion to a variety of low surface energy substrates and consequently excellent protection.
TECHNICAL DATA
Property
Test Method
Result
Appearance
Visual
clear, red to brown liquid
*Color
ASTM D 1544-04
2 G max.
*Amine value
ASTM D 1652
1600 – 1800mg KOH/g
*Viscosity @ 25°C
ASTM D 2196-05
5 – 10 cPs
Odor
–
Amine
*Density @ 25°C
ASTM D 1475-98
0.93 – 0.99 g/cc
*AHEW
–
21
*Flash Point
ASTM D 93
>150°C
*Typical results under laboratory conditions.
PACKAGING
Zepoxy REH 7270 is available as follows:
25 KG Cans
195 KG Drums
1000 KG Tanks (Upon Special Request)
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy REH 7270 is low viscosity polyamine hardener suitable to cure at ambient temperature. It is highly reactive and should not be used in excess of the recommended mixing ratio. It is sensitive to the humidity and hence must always be stored in tightly closed containers. When systems based on this are fully cured, they possess excellent electrical insulation properties and high mechanical strength. It provides good adhesion to a variety of low surface energy substrates and consequently excellent protection.
TECHNICAL DATA
Property
Test Method
Result
Appearance
Visual
clear, red to brown liquid
*Color
ASTM D 1544-04
2 G max.
*Amine value
ASTM D 1652
1600 - 1800mg KOH/g
*Viscosity @ 25°C
ASTM D 2196-05
5 – 10 cPs
Odor
-
Amine
*Density @ 25°C
ASTM D 1475-98
0.93 – 0.99 g/cc
*AHEW
-
21
*Flash Point
ASTM D 93
>150°C
*Typical results under laboratory conditions.
PACKAGING
Zepoxy REH 7270 is available as follows:
25 KG Cans
195 KG Drums
1000 KG Tanks (Upon Special Request)
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.
