Zepoxy 100

Zepoxy Quick

Zepoxy Quick is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

Clear
Add to wishlist
Category

    Zepoxy Quick is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

    TECHNICAL DATA

    Property Test Method Result
    Appearance Part A Visual Medium viscosity, clear to light yellow liquid
    Appearance Part B Visual Medium viscosity, clear liquid
    Mix ratio (Part A: Part B) Theoretical 100: 100
    *Mix viscosity @ 25°C ASTM D 2196 8000 – 13000 cPs
    *Flash Point ASTM D 93 >135°C
    *Pot life (300g mix) @ 30°C – 1m @ 30⁰C
    *Gel time (10g mix) @ 30°C – 6m @ 30⁰C
    *Hardening time – 2 hours
    *Full Cure – 2 days

    These are typical results under laboratory conditions.

    NOTE:

    At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

    PAKAGING

    Zepoxy Quick is available as follows:

    Mini Set          200g                  Part A: 100g
    Part B: 100g

    Full Set           2 KG                   Part A: 1 KG
    Part B: 1 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    Mini Set 200g, Full Set 2 KG
Technical Datasheet
Product Description
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy Quick is a multipurpose rapid setting adhesive for all types of substrates and a wide variety of plastics. It dries and cures in minutes, giving excellent bonding and can even be cured rapidly in drops. It also shows excellent curing behavior at low temperatures down to -5°C.

TECHNICAL DATA

Property Test Method Result
Appearance Part A Visual Medium viscosity, clear to light yellow liquid
Appearance Part B Visual Medium viscosity, clear liquid
Mix ratio (Part A: Part B) Theoretical 100: 100
*Mix viscosity @ 25°C ASTM D 2196 8000 – 13000 cPs
*Flash Point ASTM D 93 >135°C
*Pot life (300g mix) @ 30°C - 1m @ 30⁰C
*Gel time (10g mix) @ 30°C - 6m @ 30⁰C
*Hardening time - 2 hours
*Full Cure - 2 days
These are typical results under laboratory conditions.

NOTE:

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

PAKAGING

Zepoxy Quick is available as follows: Mini Set          200g                  Part A: 100g Part B: 100g Full Set           2 KG                   Part A: 1 KG Part B: 1 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.