rer wh230-01

Zepoxy WH 230

Zepoxy WH 230 is a water-based curing agent designed especially for use in construction applications such as flooring. In this application Zepoxy WH 230 gives excellent performance in combination with Zepoxy RER 128 as well as Zepoxy WR 110.

Clear
Add to wishlist
Category

    Zepoxy WH 230 is a water-based curing agent designed especially for use in construction applications such as flooring. In this application Zepoxy WH 230 gives excellent performance in combination with Zepoxy RER 128 as well as Zepoxy WR 110.

    Zepoxy WH 230 is available in water at 65% solids. It can be used to formulate V.O.C free systems for confined areas as well as coatings ad toppings for damp surfaces including green concrete. Zepoxy WH 230 possessed excellent water vapor permeability and can also be formulated into high strength grouts, wear resistance concrete toppings and in epoxy modified cements.

    APPLICATIONS

    • Self levelling floors
    • Trowel floors and floor toppings
    • Grouts
    • Cementitious products
    • Primer / sealer for concrete floors

    ADVANTAGES

    • Provides low VOC product.
    • No additional emulsifier is required to emulsify liquid epoxy resin.
    • Good slip resistance and scratch resistance.
    • Can be applied in high humidity environments and on wet surfaces.
    • Forms flooring with higher water vapor permeability compared to conventional
    • solvent based or solvent free systems.
    • Good viscosity stability upon dilution with water.
    • Can be mixed with cement.
    • No fire hazard.
    • Easy to clean with water.

    TECHNICAL DATA

    Property Test Method Result
    Appearance visual Pale orange liquid
    *Color ASTM D 1544-04 12.0 G max.
    *Viscosity @ 25°C ASTM D 2196-05 10,000 – 20,000 cPs
    *Pot Life @ 25°C TEC-AS-P-111 180 minutes
    *Non-volatiles TEC-AS-C-012 65 ± 2 %
    *Amine Value DIN 16945 180 – 250 mg KOH/g
    *AHEW — 260 – 275
    *Mixing Ratio with Zepoxy RER 128 (EEW = 188g/eq) — 100: 140
    *Mixing Ratio with Zepoxy
    WR 110    		 — 100: 75
    *Flash Point ASTM D 93 >100°C

    *Typical results under laboratory conditions.

    PAKAGING

    Zepoxy WH 230 is available as follows:

    1 KG, 5KG, 15KG, 30KG, and 200KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    1 KG, 5 KG, 10 KG, 15 KG, 30 KG, 200 KG
Technical Datasheet
Product Description
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy WH 230 is a water-based curing agent designed especially for use in construction applications such as flooring. In this application Zepoxy WH 230 gives excellent performance in combination with Zepoxy RER 128 as well as Zepoxy WR 110. Zepoxy WH 230 is available in water at 65% solids. It can be used to formulate V.O.C free systems for confined areas as well as coatings ad toppings for damp surfaces including green concrete. Zepoxy WH 230 possessed excellent water vapor permeability and can also be formulated into high strength grouts, wear resistance concrete toppings and in epoxy modified cements.

APPLICATIONS

  • Self levelling floors
  • Trowel floors and floor toppings
  • Grouts
  • Cementitious products
  • Primer / sealer for concrete floors

ADVANTAGES

  • Provides low VOC product.
  • No additional emulsifier is required to emulsify liquid epoxy resin.
  • Good slip resistance and scratch resistance.
  • Can be applied in high humidity environments and on wet surfaces.
  • Forms flooring with higher water vapor permeability compared to conventional
  • solvent based or solvent free systems.
  • Good viscosity stability upon dilution with water.
  • Can be mixed with cement.
  • No fire hazard.
  • Easy to clean with water.

TECHNICAL DATA

Property Test Method Result
Appearance visual Pale orange liquid
*Color ASTM D 1544-04 12.0 G max.
*Viscosity @ 25°C ASTM D 2196-05 10,000 – 20,000 cPs
*Pot Life @ 25°C TEC-AS-P-111 180 minutes
*Non-volatiles TEC-AS-C-012 65 ± 2 %
*Amine Value DIN 16945 180 - 250 mg KOH/g
*AHEW --- 260 - 275
*Mixing Ratio with Zepoxy RER 128 (EEW = 188g/eq) --- 100: 140
*Mixing Ratio with Zepoxy WR 110 --- 100: 75
*Flash Point ASTM D 93 >100°C
*Typical results under laboratory conditions.

PAKAGING

Zepoxy WH 230 is available as follows: 1 KG, 5KG, 15KG, 30KG, and 200KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.