Zepoxy REH 7301
Zepoxy REH 7301 is a low viscosity, low color and long pot life modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as Zepoxy RER 128 / Di Glycidyl Ether of Bisphenol A (EEW 190) to produce solvent free room temperature curable thermoset coatings and floor toppings of high mechanical strength. When formulated appropriately with epoxy resin it gives clear, air free, glossy surfaces. It also provides resistance to variety of chemicals such as acids, alkalis, hydrocarbons, and water. Zepoxy REH 7301, being cycloaliphatic, also provides excellent weather resistance. It is less irritating, gives low odor, excellent transparency, and light color.
Add to wishlist
Product Description
Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.
Zepoxy REH 7301 is a low viscosity, low color and long pot life modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as Zepoxy RER 128 / Di Glycidyl Ether of Bisphenol A (EEW 190) to produce solvent free room temperature curable thermoset coatings and floor toppings of high mechanical strength. When formulated appropriately with epoxy resin it gives clear, air free, glossy surfaces. It also provides resistance to variety of chemicals such as acids, alkalis, hydrocarbons, and water. Zepoxy REH 7301, being cycloaliphatic, also provides excellent weather resistance. It is less irritating, gives low odor, excellent transparency, and light color.
*Typical results under laboratory conditions
*Typical results under laboratory conditions
APPLICATIONS
-
- Solvent-free, high solids coatings
- Self-leveling floorings
- Primers and screeds
- Transparent coatings
- Chemical resistant mortars and linings
- Electronic potting
TECHNICAL DATA
Property | Test Method | Result |
---|---|---|
Appearance | visual | Clear, colorless to light yellow liquid |
*Color | ASTM D 1544-04 | 2 G max. |
*Amine value | ASTM D 1652 | 290 - 320 mg KOH/g |
*Viscosity @ 25°C | ASTM D 2196-05 | 150 - 350 cPs |
Odor | --- | Amine |
*Density @ 25°C | ASTM D 1475-98 | 1.04 g/cc |
*AHEW | --- | 98 |
*Mix ratio w/ RER 128 | --- | 100 : 50 |
*Pot life (300g mass) with Zepoxy RER 128 | --- | 38m @ 30°C 24m @ 45°C |
*Gel time (15g mass) with Zepoxy RER 128 | --- | 4h 10m @ 25°C 2h 50m @ 30°C |
*Flash Point | ASTM D 93 | >117°C |
CURED SYSTEM PROPERTIES
Property | Test Method | RER 128 / REH 7301 | RER 816 / REH 7301 |
---|---|---|---|
Mix ratio | |||
100 / 50 | 100 / 50 | ||
*Flexural Strength | ASTM D 790 | 82.2 MPa | 56.7 MPa |
*Compressive Strength - Ultimate | ASTM D 695 | 81.7 MPa | 76.9 MPa |