Silprime 3K

Silprime 3K

Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.

Clear
Add to wishlist
Category

    Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.

    ADVANTAGES of Silprime 3K

    • Outstanding adhesion, even to moist and marginally pretreated steel
    • Good surface aspect, even under adverse conditions
    • Chemical resistance is perfectly adequate for primers, decorative coatings, and for heavy duty protection against atmospheric corrosion.

    TECHNICAL DATA

    Component Three:  Part A: Base   Part B: Hardener         Part C: Hardener
    Mixing Ratio Part A: 0.82    Part B: 0.29   Part C: 0.14
    Mixed Form Liquid
    Pot Life 35 mins ± 10 mins
    Gel Time 70 mins ± 10 mins
    Drying time 4 to 5 hours
    Full Cure 7 Days
    Bond Strength 1.5 N / mm2
    Application temperature +5°C to +40°C
    Service Temperature +5°C to +70°C

    *Typical Results under laboratory conditions 

    MIX RATIO

    The optimum mix ratio of Silprime 3K (Part A and B) is 100:60 parts by weight. Part C is used as diluent as and when required.

    USAGE RATES

    • For standard Metal surface 200-300 g/m2 as primer
    • 2 X 350 g/m2 as surface applied damp proof membrane
    • Metal and wood as indoor durable coatings
    • A film of minimum 100 micron is recommended

    SHELF LIFE

    Expiration of Silprime 3K is at 6 months after production date under dry and sheltered conditions.

    PACKAGING

    Silprime 3K is available in 1.25 KG Kits.
    Part A: 820gm                            Part B: 290gm                       Part C: 140gm (Diluent)

    HEALTH & SAFETY

    Silprime 3K is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

    Packaging

    1.25 KG
Technical Datasheet Coverage Calculator
Product Description

Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.

Silprime 3K is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.

ADVANTAGES of Silprime 3K

  • Outstanding adhesion, even to moist and marginally pretreated steel
  • Good surface aspect, even under adverse conditions
  • Chemical resistance is perfectly adequate for primers, decorative coatings, and for heavy duty protection against atmospheric corrosion.

TECHNICAL DATA

Component Three:  Part A: Base   Part B: Hardener         Part C: Hardener
Mixing Ratio Part A: 0.82    Part B: 0.29   Part C: 0.14
Mixed Form Liquid
Pot Life 35 mins ± 10 mins
Gel Time 70 mins ± 10 mins
Drying time 4 to 5 hours
Full Cure 7 Days
Bond Strength 1.5 N / mm2
Application temperature +5°C to +40°C
Service Temperature +5°C to +70°C

*Typical Results under laboratory conditions 

MIX RATIO

The optimum mix ratio of Silprime 3K (Part A and B) is 100:60 parts by weight. Part C is used as diluent as and when required.

USAGE RATES

  • For standard Metal surface 200-300 g/m2 as primer
  • 2 X 350 g/m2 as surface applied damp proof membrane
  • Metal and wood as indoor durable coatings
  • A film of minimum 100 micron is recommended

SHELF LIFE

Expiration of Silprime 3K is at 6 months after production date under dry and sheltered conditions.

PACKAGING

Silprime 3K is available in 1.25 KG Kits.
Part A: 820gm                            Part B: 290gm                       Part C: 140gm (Diluent)

HEALTH & SAFETY

Silprime 3K is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.