Stone Guard is a protective surface treatment designed to enhance durability and moisture resistance for natural stone and masonry surfaces. The product penetrates effectively into porous materials to help reduce water absorption, staining, and environmental deterioration while maintaining the natural surface appearance. Its advanced formulation supports long-term surface protection and improved durability in exposed environments. Stone Guard is suitable for stone facades, flooring, paving surfaces, and decorative architectural elements requiring dependable protection and weather resistance.
Stone Guard is a protective surface treatment designed to enhance durability and moisture resistance for natural stone and masonry surfaces. The product penetrates effectively into porous materials to help reduce water absorption, staining, and environmental deterioration while maintaining the natural surface appearance. Its advanced formulation supports long-term surface protection and improved durability in exposed environments. Stone Guard is suitable for stone facades, flooring, paving surfaces, and decorative architectural elements requiring dependable protection and weather resistance.
Stone Guard is a Solvent-Based, Higher alkylated alkoxy siloxane & Fluro carbons resin-based product, suitable as an impregnating agent for masonry to have easy to Clean properties. It demonstrates deep penetration into a variety of absorbent mineral building materials.
ADVANTAGES of Stone Guard
Can be used as impregnating agent to reduce water & oil-based stains from the
surfaces, such as fresh concrete, plaster, calcium silicate bricks, terracotta, and natural stones.
Penetrates porous surfaces.
Provides water/Oil repellent, breathable coating.
Application versatility: can be applied by spray, brush, roll or flow coating
TECHNICAL DATA
Property
Typical Value
Specific Gravity
1.1 g/ml
Color
Clear to light yellow
*Typical Results under laboratory conditions
APPLICATION
The solution can be applied directly to the dry, porous building material. Adjacent surfaces such as doors, windows, and other non-absorbent surfaces should be masked before spraying to avoid contact with the impregnating solution. Typically, the solution is spray applied generously and evenly, and a second coat should be applied while the first is still wet. Large surfaces are usually treated by flooding the surface with the diluted solution. That is, the surface is sprayed with the solution and the solution can run down the surface like a curtain, the solution can also be applied by dipping or brushing. The quantity of solution to be applied varies greatly depending on the surface porosity. Typical coverage varies between 0.1 and 1.0 liters per square meter of surface for the diluted solution. Preliminary evaluation should be conducted to determine the coverage requirements.
STAIN RESISTIVITY
Scale from 0 (no stain noticeable after cleaning process) to 4 (strong staining noticeable after cleaning process)
Stone Guard reacts with moisture, and therefore the diluted solutions should be stored in tightly sealed containers. Additionally, the solvent used for dilution should not be contaminated with water to maximize the storage life of the diluted solution.
COVERAGE
6.5 m²/liter/approx. depends upon substrate.
PACKAGING
Stone Guard is available in the following packaging. 1 Ltr, 5 Ltr, 15 Ltr, 25 Ltr and 200 Ltr.
SHELF LIFE
03 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.
HEALTH AND SAFETY
Stone Guard contains heavy solvents, containers should not be opened during transport. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks should be worn during application. Please refer to the MSDS of the product for further health and safety information.
NOTE:
If printed packaging not available, neutral packaging with label. Lot number and manufacturing date to be stamped at the back of each packaging.
