Terrazzo Retarder
Terrazzo Retarder is a specialized surface retarding solution formulated for terrazzo and decorative concrete applications requiring controlled surface exposure and improved finishing quality. The product helps delay surface setting to allow proper aggregate exposure while supporting consistent decorative results during finishing operations. Its advanced formulation contributes to improved application efficiency and enhanced surface appearance in architectural concrete projects. Terrazzo Retarder is suitable for terrazzo flooring, decorative concrete surfaces, exposed aggregate finishes, and commercial architectural applications requiring reliable retarding performance.
Terrazzo Retarder is a concrete surface retarder suitable for use on horizontal surfaces to produce decorative exposed aggregate finishes or profile surfaces for subsequent toppings, overlays or membranes. Terrazzo Retarder, applied to fresh, green concrete, retards the surface mortar set eliminating the needs for costly sandblasting or acid washing.
USES
- Horizontal concrete surfaces
- Suitable for precast panels, sidewalks, driveways, and patios
- Leaves rough surface to improve mechanical bond for keyway joints, waterproofing membranes, and cementitious coatings.
ADVANTAGES
- Tinted formulation insures even coverage and performance.
- Easy to apply with standard pressurized spray equipment, brush, or roller.
- Less costly than sandblasting or green cutting.
- Aggregates remain clean and sharp with no residue to neutralize.
- Use on adjacent masonry or reinforcing steel to reduce cleaning procedures.
- Eliminates environmental dangers associated with acid washing or other chemical methods.
- Provides uniform depth of retardation up to 0.25 inches (6mm).
ESTIMATING GUIDE
Estimation of material consumption varies with surface conditions. Smooth, trowel finishes, and forms will require an approximately 100 SFT per gallon (2.5m2/ Liter). Heavy broom or rough finishes may require additional materials.
Approximate dwell time varies from 4 to 24 hours depending on the temperature and the concrete mix design. A test panel is strongly recommended using the specific concrete mix to determine the appropriate dwell time. For example: 24°C and above 4 to 8 hours. Do not apply below 10°C.
APPLICATION
Approximate dwell time varies from 4 to 24 hours depending on the temperature and the concrete mix design. A test panel is strongly recommended using the specific concrete mix to determine the appropriate dwell time. For example: 24°C and above 4 to 8 hours. Do not apply below 10°C. Ressichem has a variety of sealers to seal the finished surface. Please refer to the Ressichem range of sealers for further information.
CLEANUP
Before material dries and hardens, clean tools and equipment with detergent and warm water.
STORAGE
Do not allow to freeze. Store tightly closed containers in warm, dry area. Shelf life of properly stored material is one year from date of manufacture.
LIMITATION
Do not apply at ambient temperatures below 10°C.
Failure to completely remove material from treated surface may result in a slight green discoloration of concrete and the finished surface.
PACKAGING
Terrazzo Retarder is available as follows:
1 Ltr, 5 Ltr, 10 Ltr, 15 Ltr and 25 Ltr Packs.
HEALTH AND SAFETY
Terrazzo Retarder is regarded as non-hazardous for transportation. Do not re use bags and containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application.
