Silmix
Silmix is water-based emulsion of alkoxy silane / siloxane used for water resistance treatment of plaster, screed, and mortar.
Silmix is a water-based emulsion of alkoxy silane / siloxane used for water resistance
treatment of plaster, screed, and mortar.
ADVANTAGES OF SILMIX
- Prevents absorption of dissolved salts and soluble substances from surrounding environments.
- Prevents rising dampness and water ingress at plaster, screed, and mortar surfaces.
- Non-toxic material.
- Compatible with most types of cement and aggregates.
TECHNICAL DATA
| Property |
Condition |
Value |
Method |
| Active Substance |
- |
50 wt. % |
- |
| Appearance |
- |
Milky, white, transparent |
ASTM D 412 |
| Density |
25°C |
0.95 g/cm³ |
Not specified |
| Viscosity, Dynamic |
25°C |
Approx. 12 mPa·s |
Not specified |
*Typical results obtained under laboratory conditions.
APPLICATION SCOPE
It is recommended to use Silmix in all plasters, around kitchens, bathrooms, and roofs,
and also in screed. For long-term waterproofing, concentrated doses can be added to the cement content.
DOSAGE
Dilute with water at a ratio of 1 part Silmix to 100 parts water.
This diluted solution is used in all aspects of mortar preparation including block / brick laying,
plastering, screeding, and repairing.
For smaller applications or where higher water repellency is required,
1 liter of Silmix can be added to material prepared with
1 bag of cement.
PACKAGING
Silmix is available in the following packaging:
1 Liter, 5 Liter, 10 Liter, 15 Liter, 25 Liter, 200 Liter, and 1000 Liter.
SHELF LIFE
12 months from the date of manufacture when stored under warehouse conditions
in original unopened packaging. Extreme temperature or humidity may reduce shelf life.
HEALTH & SAFETY
Silmix is regarded as non-hazardous for transportation.
Do not reuse containers and dispose of packaging as per local rules and regulations.
Gloves and suitable masks should be worn during application.
Please refer to the product MSDS for further health and safety information.
NOTE
If printed packaging is not available, neutral packaging with label may be used.
Lot number and manufacturing date must be stamped on the back of each package.