Zepoxy Steel 5 min is a multipurpose rapid setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength, and has resistance to high temperature, pressure, and grease. It also shows excellent curing behavior at low temperatures down to -5°C.
Zepoxy Steel 5 min is a multipurpose rapid setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength, and has resistance to high temperature, pressure, and grease. It also shows excellent curing behavior at low temperatures down to -5°C.
Zepoxy Steel 5 min is a multipurpose rapid setting adhesive for an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. This product cures with high bonding strength, and has resistance to high temperature, pressure, and grease. It also shows excellent curing behavior at low temperatures down to -5°C.
TECHNICAL DATA
Property
Test Method
Result
Appearance Part A
Visual
High viscosity, black paste
Appearance Part B
Visual
High viscosity, grey paste
Mix ratio (Part A: Part B) by weight
Theoretical
100: 80
Mix ratio (Part A: Part B) by volume
Theoretical
100: 100
*Mix viscosity @ 25°C
ASTM D 2196
500,000 – 1,000,000 cPs
*Flash Point
ASTM D 93
>150°C
*Pot life (10g mix) @ 30°C
-
3m @ 30⁰C
*Gel time (10g mix) @ 30°C
-
4m 30s @ 30⁰C
*Hardening time
-
2 hours
*Full Cure
-
2 days
These are typical results under laboratory conditions.
ADVANTAGES
They include but not limited to:
Household repairs
Marine
Automotive
Plumbing
Crafts and more
NOTE
At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.
INSTRUCTION OF USE
Surface should be thoroughly cleaned, free from loose particles like dust, oil, grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 2 mins.
PAKAGING
Zepoxy Steel 5 min is available as follows:
Small Tube Set 10g Part A: 5g Part B: 5g
Medium Tube Set 30g Part A: 15g Part B: 15g
Commercial Pack 2 KG Part A: 1 KG Part B: 1 KG
Bulk pack 40 KG Part A: 20KG Part B: 20 KG
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.
