Zepoxy Electropot Supreme

Zepoxy Electro Pot Supreme
Low viscosity, high gloss, electronic component potting adhesive.

TECHNICAL DATA

^{These are typical results under laboratory conditions, actual coverage and timings may vary as per actual working environment.}

USAGE GUIDELINE

Premix Part A at moderate speed with a mechanical mixer for 2-3 minutes, then add Part B and further mix at medium speed for 1-2 minutes. After pouring the mix in the electronic components, generated foam will finish by itself after some time. Once the epoxy is tack-free, for superior final performance post-cure it at elevated temperature for 2-4 hours.

PACKAGING

Zepoxy Electro Pot Supreme is available as follows:

1.23 KG Set       Part A: 1 KG
                         Part B: 230g

24.6 KG Set       Part A: 20 KG
                         Part B: 4.6 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.