Max Flo SP 802 Powder

Max Flo SP 802 (Powder)

Max Flo SP 802 (Powder) is a powerful admixture specifically designed for producing high slump concrete in hot climates. It is based on selected sulphonated naphthalene polymers and is a powerful de-flocculent.

Clear
Add to wishlist
Category

    Max Flo SP 802 (Powder) is a powerful admixture specifically designed for producing high slump concrete in hot climates. It is based on selected sulphonated naphthalene polymers and is a powerful de-flocculent.

    STANDARD

    ASTM C494, Type B, D and G, BS EN 934-2

    USES

    Max Flo SP 802 (Powder) may be used in tunnel linings, dams, power plants, highways, ports and other large project where high performance concrete is required. A substantial water reducing agent, it is used for promoting high early and ultimate strength.

    ADVANTAGES 

    • High slump concrete for congested areas.
    • Extension of workability.
    • Improved permeability and durability of concrete.
    • Up to 25% water reduction.
    • No excessive air entrainment.
    • Better surface finish.
    • Durable concrete may be achieved.
    • Better resistance to wear and abrasion.
    • Chloride free.
    • Reduced shrinkage and creep.
    • Suitable for hot climates.

    TYPICAL PROPERTIES AT 25°C

    Property Test Method Value
    Appearance – Brown Powder
    Bulk Density – 0.75 kg/Ltr +/- 0.05
    ColorChloride Content  BS 5075 Nil to BS EN 934-2
    Air Entrainment – Up to 1% over control mix

    Typical results under laboratory conditions.

    Results may vary as per site and usage conditions.

    COMPATIBILIYT

    Max Flo SP 802 (Powder) can be used with all types of cements and cementitious materials like fly ash, GGBS, micro silica etc. It should not be pre-mixed with other admixtures.

    DOSAGE

    Recommended dosage is 0.25 – 1.5 % by weight of cementitious material. Higher dosage can be used after verification of performance by conducting lab and site trials.

    EFFECT OF OVERDOSING

    Overdosing may result in higher workability and delay in setting. If intentionally or accidentally, dosage used is above the recommended dosages, care must be take not allow for the effect on the striping of formwork. In such cases, provide the concrete is properly cured the ultimate strength will generally be higher than the regular concrete.

    PACK SIZE

    Available in 2KG and 20 KG packs.

    NOTE

    Max Flo SP 802 (Powder) can be mixed with water directly to form an admixture solution that can be used as per recommended dosage and concentration of the powder. The recommended dosage should be as per the powdered dosage as mentioned in the dosage section of this datasheet. It is always recommended to conduct a trial before dosages and dosing methodology is defined.

    SHELF LIFE

    12 months from the date of manufacture when stored under cool and dry warehouse conditions in original unopened packaging. Extreme temperature and humidity may reduce shelf life.

    HEALTH AND SAFETY

    This product is considered as non-hazardous and safe for transportation. Suitable masks and gloves can be worn during application. Contact with skin should be avoided. Refer to product MSDS for further health and safety information.

    Packaging

    2 KG, 20 KG
Technical Datasheet
Product Description

Max Flo SP 802 (Powder) is a powerful admixture specifically designed for producing high slump concrete in hot climates. It is based on selected sulphonated naphthalene polymers and is a powerful de-flocculent.

Max Flo SP 802 (Powder) is a powerful admixture specifically designed for producing high slump concrete in hot climates. It is based on selected sulphonated naphthalene polymers and is a powerful de-flocculent.

STANDARD

ASTM C494, Type B, D and G, BS EN 934-2

USES

Max Flo SP 802 (Powder) may be used in tunnel linings, dams, power plants, highways, ports and other large project where high performance concrete is required. A substantial water reducing agent, it is used for promoting high early and ultimate strength.

ADVANTAGES 

  • High slump concrete for congested areas.
  • Extension of workability.
  • Improved permeability and durability of concrete.
  • Up to 25% water reduction.
  • No excessive air entrainment.
  • Better surface finish.
  • Durable concrete may be achieved.
  • Better resistance to wear and abrasion.
  • Chloride free.
  • Reduced shrinkage and creep.
  • Suitable for hot climates.

TYPICAL PROPERTIES AT 25°C

Property Test Method Value
Appearance - Brown Powder
Bulk Density - 0.75 kg/Ltr +/- 0.05
ColorChloride Content  BS 5075 Nil to BS EN 934-2
Air Entrainment - Up to 1% over control mix

Typical results under laboratory conditions.

Results may vary as per site and usage conditions.

COMPATIBILIYT

Max Flo SP 802 (Powder) can be used with all types of cements and cementitious materials like fly ash, GGBS, micro silica etc. It should not be pre-mixed with other admixtures.

DOSAGE

Recommended dosage is 0.25 – 1.5 % by weight of cementitious material. Higher dosage can be used after verification of performance by conducting lab and site trials.

EFFECT OF OVERDOSING

Overdosing may result in higher workability and delay in setting. If intentionally or accidentally, dosage used is above the recommended dosages, care must be take not allow for the effect on the striping of formwork. In such cases, provide the concrete is properly cured the ultimate strength will generally be higher than the regular concrete.

PACK SIZE

Available in 2KG and 20 KG packs.

NOTE

Max Flo SP 802 (Powder) can be mixed with water directly to form an admixture solution that can be used as per recommended dosage and concentration of the powder. The recommended dosage should be as per the powdered dosage as mentioned in the dosage section of this datasheet. It is always recommended to conduct a trial before dosages and dosing methodology is defined.

SHELF LIFE

12 months from the date of manufacture when stored under cool and dry warehouse conditions in original unopened packaging. Extreme temperature and humidity may reduce shelf life.

HEALTH AND SAFETY

This product is considered as non-hazardous and safe for transportation. Suitable masks and gloves can be worn during application. Contact with skin should be avoided. Refer to product MSDS for further health and safety information.