Max Flo P 800 (Powder)
Max Flo P 800 Powder is a high-performance powdered concrete admixture developed to improve concrete workability, cohesion, and structural durability in demanding construction projects. The product supports reduced water demand while enhancing concrete placement efficiency and finishing quality for dependable long-term performance. Its advanced formulation contributes to reliable strength development and consistent concrete behavior under varying site conditions. Max Flo P 800 Powder is suitable for reinforced concrete structures, infrastructure developments, commercial projects, and precast applications requiring durable concrete enhancement solutions.
Max Flo P 800 (Powder) is a powerful concrete plasticizer and retarding admixture
designed to improve the workability of concrete mixes while reducing water content.
STANDARDS
ASTM C494, Type B and D and BS EN 934-2
USES
Max Flo P 800 (Powder)is used for reduction of free water content in concrete mixes at the stage
time improving the workability of the concrete. It is used to produce workable and dense concrete
for use in construction of tunnels, runways, canals, dams, reservoirs, marine structures and in the
manufacture of ready mix concrete.
ADVANTAGES
- Provides extended slump retention even at high temperatures
- Improves workability in all types of concrete mixes
- Offers 10–15% water reduction
- Increases strength of concrete
- Reduces water without loss of workability
- Produces pumpable concrete
- Helps in achieving cement reduction
- Enhances durability of concrete
- Extends setting time at high temperatures
- Reduces shrinkage and creep
TYPICAL PROPERTIES AT 25°C
| Property |
Test Method |
Value |
| Component |
- |
Single |
| Form |
- |
Powder |
| Color |
- |
Brown to Grey |
| Air Entrainment |
ASTM C231 |
Up to 1% over control mix |
| Chloride Content |
BSEN 480-10 |
Nil to BSEN 934-2 |
Typical results under laboratory conditions. Results may vary depending on site and usage conditions.
COMPATIBILITY
Max Flo P 800 (Powder) can be used with all types of cements and cementitious materials like fly
ash, GGBS, micro silica etc. Max Flo P 800 (Powder) should not be pre-mixed with other admixtures.
DOSAGE
Recommended dosage is 0.25 – 0.75 % by weight of cementitious material. Optimum dosage of
Max Flo P 800 (Powder) and effect of concrete properties such workability, strength, setting time,
etc. The concrete and mortar properties are best assessed after preliminary tests on site using the
actual material of mixes under consideration.
EFFECT OF OVERDOSING
Overdosing may result in higher workability and delay in setting. If intentionally or accidentally,
dosage used is above the recommended dosages, care must be taken to allow for the effect on the
striping of formwork. In such cases, provided the concrete is properly cured the ultimate strength
will generally be higher than the regular concrete. The effects of overdosing are increased when
sulphate resistant cement is used in the concrete mixes because of the chemical nature of the
cement as compared to that of OPC.
PACK SIZE
Available in 1 KG and 20 KG packs.
DISPENSING
Max Flo P 800 (Powder) should be directly mixed with sand, cement, and aggregates
during batching.
SHELF LIFE
12 months from the date of manufacture when stored in cool and dry warehouse conditions in the original
unopened packaging. Extreme temperatures and humidity may reduce shelf life.
HEALTH AND SAFETY
This product is considered non-hazardous and safe for transportation. Suitable masks and gloves should
be worn during application. Avoid contact with skin. Refer to the product MSDS for further health and
safety information.
NOTE:
If printed bags / pouches are not available, neutral bags / pouches with label. Lot number and
manufacturing date to be stamped at the back.
