Max Flo 4000
Max Flo 4000 is a modified polycarboxylate ether bases superplasticiser having unique carboxylic
ether polymer with long lateral chains, it is an effective cement dispersant, fluidifier and high range
water reducer as compared to conventional superplasticisers.
Max Flo 4000 is a modified polycarboxylate ether bases superplasticiser having unique carboxylic
ether polymer with long lateral chains, it is an effective cement dispersant, fluidifier and high range
water reducer as compared to conventional superplasticisers.
STANDARD
ASTM C 494 Type D and G, BS EN 934-2
USES
Max Flo 4000 is specially intended for use in self-compacting concrete, high strength concrete,
durable concrete containing GGBS, micro silica, fly ash, etc. It is used in ready-mix concrete where
extra ordinary slump retention is required in hot weather conditions. Extremely useful in high
fines concrete.
ADVANTAGES OF MAX FLO 4000
- Produces free flowing concrete without segregation and bleeding
- High strength concrete with low water content
- Produces self-compacting concrete without segregation
- Improves surface finish
- Improve adhesion to reinforcing and stressing steel
- Lower permeability, better resistance to carbonation
- Increase flexural strengths
- Good slump retention for longer time
- Remarkably superior performance than normal superplasticiser
TYPICAL PROPERTIES (AT 25°C)
| Property |
Test Method |
Value |
| Component |
- |
Single |
| Form |
- |
Liquid |
| Color |
- |
Brown |
| Specific Gravity |
ASTM C 494 |
1.10 ± 0.02 |
| Air Entrainment |
ASTM C231 |
Up to 1% over control mix |
| Chloride Content |
BS EN 480-10 |
Nil to BS EN 934-2 |
| pH |
ASTM C 494 |
5 – 7 |
Typical results obtained under laboratory conditions.
Results may vary depending on site and usage conditions.
COMPATIBILITY
Max Flo 4000 can be used with all types of cements and cementitious materials like fly ash, GGBS,
micro silica etc. It should not be premixed with other admixtures unless recommended by
Ressichem Technician.
DOSAGE
Recommended dosage is 0.5 – 1.0 % by weight of cementitious material. Higher dosage can be used
after verification of performance by conducting lab and site trials. Optimum dosage of Max Flo 4000
and effect on concrete properties such as workability, strength, setting time, etc. are best assessed
after preliminary tests on site using the actual material of mixes under consideration for self-com
pacting concrete, a viscosity enhancer.
EFFECT OF OVERDOSING
Overdosing may result in higher workability and delay in setting. In such cases, provided the
concrete is properly cured, the ultimate strength will generally be high than the regular concrete.
PACK SIZE
Available in 1 Liter, 5 Liters, 10 Liters, 15 Liters, 25 Liters, and 200 Liters packaging.
DISPENSING
Max Flo 4000 should be directly dispensed into the concrete mixer along with the mixing water.
SHELF LIFE
12 months from the date of manufacture when stored in a cool and dry warehouse in original, unopened packaging. Exposure to extreme temperatures and humidity may reduce shelf life.
HEALTH AND SAFETY
This product is considered non-hazardous and safe for transportation. The use of suitable masks and gloves during application is recommended. Avoid direct contact with skin. Refer to the product MSDS for detailed health and safety information.