Zepoxy Tabletop Deep Pour

Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

Clear
Add to wishlist

    Zepoxy Tabletop Deep Pour (Epoxy Countertops) is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

    TECHNICAL DATA

    Property Test Method Result
    Appearance Part A Visual Low viscosity, clear liquid
    Appearance Part B Visual Low viscosity, clear liquid
    Mix ratio (Part A: Part B) Theoretical 100: 50
    *Pot life (300g mass) @30°C 7h 30m
    *Pot life (300g mass) @45°C 1h 13m
    *Flash Point ASTM D 93 >150°C
    *Coverage per KG Theoretical 1 SFT @ 10mm thick
    Recommended pouring thickness1 0.5 inch – 1 inch (above 5 kg pour)
    *Re-cast time 24h-72h

    These are typical results under laboratory conditions.

    1If pouring thickness is exceeded it may result in yellowing, bubble entrapment and/or cracking.

      1.5 KG mass @ 2.5 inch thick 40 KG mass @ 1 inch thick
    *Gel time @ 22°C 6 hours 2.5 hours
    *Hardening time 24 hours 24 hours
    *Full Cure 7 days 7 days

    These are typical results under laboratory conditions.

    CURED SYSTEM PROPERTIES

    Property Test Method Result
    *Flexural Strength ASTM D 790 NA
    *Compressive Strength – Yield ASTM D 695 72.0 MPa
    *Compressive Strength – Ultimate ASTM D 695 83.3 MPa

    These are typical results under laboratory conditions.

    NOTE:

    At higher mixing quantities please ensure epoxy is poured soon after mixing and that the thickness of 1 inch is not exceeded. At every 8°C temperature increase working time will be reduced to half, pouring should be planned accordingly.

    MIXING

    The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin. The mixed components should be thoroughly but slowly mixed for 3-4 minutes to ensure an even consistency.

    PAKAGING

    Zepoxy Tabletop Deep Pour is available as follows:

    1.5 KG Set                        Part A: 1 KG
                                            Part B: 500g

    15 KG Set                        Part A: 10 KG
                                           Part B: 05 KG

    45 KG Set                       Part A: 30 KG
                                          Part B: 15 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    1.5 KG, 15 KG, 45 KG


Product Description

Zepoxy Tabletop Deep Pour (Epoxy Countertops) is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

Zepoxy Tabletop Deep Pour (Epoxy Countertops) is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

TECHNICAL DATA

Property Test Method Result
Appearance Part A Visual Low viscosity, clear liquid
Appearance Part B Visual Low viscosity, clear liquid
Mix ratio (Part A: Part B) Theoretical 100: 50
*Pot life (300g mass) @30°C - 7h 30m
*Pot life (300g mass) @45°C - 1h 13m
*Flash Point ASTM D 93 >150°C
*Coverage per KG Theoretical 1 SFT @ 10mm thick
Recommended pouring thickness1 - 0.5 inch – 1 inch (above 5 kg pour)
*Re-cast time - 24h-72h

These are typical results under laboratory conditions.

1If pouring thickness is exceeded it may result in yellowing, bubble entrapment and/or cracking.

  1.5 KG mass @ 2.5 inch thick 40 KG mass @ 1 inch thick
*Gel time @ 22°C 6 hours 2.5 hours
*Hardening time 24 hours 24 hours
*Full Cure 7 days 7 days

These are typical results under laboratory conditions.

CURED SYSTEM PROPERTIES

Property Test Method Result
*Flexural Strength ASTM D 790 NA
*Compressive Strength - Yield ASTM D 695 72.0 MPa
*Compressive Strength - Ultimate ASTM D 695 83.3 MPa

These are typical results under laboratory conditions.

NOTE:

At higher mixing quantities please ensure epoxy is poured soon after mixing and that the thickness of 1 inch is not exceeded. At every 8°C temperature increase working time will be reduced to half, pouring should be planned accordingly.

MIXING

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin. The mixed components should be thoroughly but slowly mixed for 3-4 minutes to ensure an even consistency.

PAKAGING

Zepoxy Tabletop Deep Pour is available as follows:

1.5 KG Set                        Part A: 1 KG
                                        Part B: 500g

15 KG Set                        Part A: 10 KG
                                       Part B: 05 KG

45 KG Set                       Part A: 30 KG
                                      Part B: 15 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

Epoxy Countertops

With Ressichem crystal clear and low viscosity epoxy countertops, you can create endless designs and transform the place beautifully by producing exciting aesthetics. Our stone coat epoxy is designed to facilitate a glossy, crystal-clear, and textured-finish look. It contains UV inhibitors which makes it enduring, and resistant to wear and tear.

Epoxy Countertops Manufacturer in Pakistan

We are known as the best epoxy resin manufacturer for countertops in Pakistan and offer budget-friendly, chemical, and impact-resistant epoxy countertop epoxy materials, this can help achieve resemblance with bricks, tiles, wood, and stone coat countertops. The epoxy countertop resin cost ranges per KG of material. It is easy to permeate the unlimited potential designs with epoxy countertop Materials.