Zepoxy FPRE

Zepoxy FPRE (Fiber preg Roving Epoxy) is a Low viscosity, high mechanical strength epoxy system for easy wetting of carbon/glass fiber used to produce fiber glass tanks, pipes, and composites through filament winding process.

Clear
Add to wishlist

    Zepoxy FPRE (Fiber preg Roving Epoxy) is a Low viscosity, high mechanical strength epoxy system for easy wetting of carbon/glass fiber used to produce fiber glass tanks, pipes, and composites through filament winding process.

    TECHNICAL DATA

    Property Test Method

    Result

    Part A

    Part B

    Appearance Visual Low viscosity, clear to light yellow liquid Low viscosity, clear liquid
    *Viscosity ASTM D 2196 1500 – 3000 cPs 10 – 60 cPs
    *Mix ratio (Part A: Part B) Theoretical 100:14
    *Pot life @ 30°C (300g mix) 15 minutes
    *Peak Exotherm 170°C
    *Flexural Strength ASTM D 790 123.3 MPa
    *Compressive Strength – Yield ASTM D 790 94.3 MPa
    *Compressive Strength – Ultimate ASTM D 695 129.0 MPa
    *Flash Point ASTM D 93 >135°C

     These are typical results under laboratory conditions.

    PAKAGING

    Zepoxy FPRE Part A and Part B are available in the following packaging.

    15 KG, 30 KG, and 200 KG

    HEALTH AND SAFETY

    Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

    Packaging

    15 KG, 30 KG, 200 KG


Product Description

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

Zepoxy FPRE (Fiber preg Roving Epoxy) is a Low viscosity, high mechanical strength epoxy system for easy wetting of carbon/glass fiber used to produce fiber glass tanks, pipes, and composites through filament winding process.

TECHNICAL DATA

Property Test Method

Result

Part A

Part B

Appearance Visual Low viscosity, clear to light yellow liquid Low viscosity, clear liquid
*Viscosity ASTM D 2196 1500 - 3000 cPs 10 - 60 cPs
*Mix ratio (Part A: Part B) Theoretical 100:14
*Pot life @ 30°C (300g mix) - 15 minutes
*Peak Exotherm - 170°C
*Flexural Strength ASTM D 790 123.3 MPa
*Compressive Strength – Yield ASTM D 790 94.3 MPa
*Compressive Strength – Ultimate ASTM D 695 129.0 MPa
*Flash Point ASTM D 93 >135°C
 These are typical results under laboratory conditions.

PAKAGING

Zepoxy FPRE Part A and Part B are available in the following packaging. 15 KG, 30 KG, and 200 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.