Elastomeric Waterproofing

Water Guard 3020N (Elastomeric Waterproofing)

Elastomeric Waterproofing is a One Component acrylic co-polymer based flexible waterproofing system ideal for use on cementitious and metal surfaces. Water Guard 3020N is suitable for many waterproofing applications, such as swimming pools, balconies, bathrooms, wet areas, basements, roof water, roof waterproofing system in damp conditions, where other systems cannot be used, such as lift pits etc.  

Clear
Add to wishlist
Category

    Water Guard 3020N is a One Component acrylic co-polymer based flexible waterproofing system ideal for use on cementitious and metal surfaces. Elastomeric Waterproofing is suitable for many waterproofing applications, such as swimming pools, balconies, bathrooms, wet areas, basements, roof water, roof waterproofing system in damp conditions, where other systems cannot be used, such as lift pits etc.

    TECHNICAL DATA

    Property Test Method Value
    Component – Single
    Form – Viscous Paste
    Color – White
    Specific Gravity ASTM D 1457 1.50 ± 0.02
    Solid Contents ASTM D 1644 65% ± 3%
    Drying Time – 40-50 minutes
    Recoat Time – Minimum 2 Hours
    Full Cure – Minimum 7 Days
    Bond Strength ASTM D 4541 > 1 N / mm2 @ 28 Days
    Initial water absorption BS 1881 – 5 >98% reduction over control
    Crack bridging ability ASTM C 836 No Crack at 1mm thickness
    Elongation ASTM D 415 >160%
    UV Resistance ASTM G 53 No change in color after 300 hours

    *Typical Results under laboratory conditions 

    ADVANTAGES

    • Can be applied to freshly hardened concrete.
    • Excellent elongation and flexibility.
    • Exhibits crack bridging and sealing property.
    • Protection against carbonation and chlorides.
    • Excellent for damp proofing basements.
    • Excellent adhesion.
    • Easy to apply.
    • Increased frost and salt resistance

    SURFACE PREPARATION 

    Surface should be cleaned and sound, free from dust, loose particles, grease, oil, primers, from Previous membrane systems or bitumen. Bitumen or primers should be removed by shot blasting or mechanical means. Spalled concrete should be repaired by cutting to sound Concrete and patching with Polymer modified mortars. There are a variety of repairing mortars and crack fillers available in Ressichem Patch and Crack Heal range for the repairing of a variety of different surfaces. It is recommended to use polymer coated tape (Construction Grade) at all critical areas such as intersections, corner joints, floor/wall junctions, gaps, peripheral areas, or pipelines before the application of Water Guard 3020N. Prior to fixing the polymer coated tape, gaps and corners should be filled and leveled with an appropriate polymer modified Grout from the Ressichem range of products.

    APPLICATION 

    Saturate the concrete surface with clean water. Apply the first coat while the surface is still damp with no free-standing water. Apply using a short stiff bristle brush or roller at a minimum thickness of 1 mm per coat. After 2-3 hours, apply the second coat in perpendicular direction to the first coat (If the first coat has been applied in top to bottom direction, the second coat should be applied in left to right direction and vice versa). Spray or trowel application is acceptable provided the mixing ratio is adjusted to achieve the right consistency. It is recommended that for application over hollow blocks or highly porous areas, a minimum of 3 coats to total thickness of 3 mm be applied.

    CURING

    Water Guard 3020 N should be protected from high wind, direct sunshine, and rain until fully cured. Keep the treated area moist for 3-4 days after application

    SHELF LIFE

    Expiration of Water Guard 3020N is 12 months after production date under dry and sheltered conditions

    PACKAGING

    Water Guard 3020N is available in 15 KG and 20 KG Buckets

    HEALTH & SAFETY

    Water Guard 3020N is not regarded as hazardous for transportation. Do not reuse the packaging and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

    Packaging

    15 KG, 20 KG
Technical Datasheet Coverage Calculator
Product Description

Water Guard 3020N is a One Component acrylic co-polymer based flexible waterproofing system ideal for use on cementitious and metal surfaces. Elastomeric Waterproofing is suitable for many waterproofing applications, such as swimming pools, balconies, bathrooms, wet areas, basements, roof water, roof waterproofing system in damp conditions, where other systems cannot be used, such as lift pits etc.

Water Guard 3020N is a One Component acrylic co-polymer based flexible waterproofing system ideal for use on cementitious and metal surfaces. Elastomeric Waterproofing is suitable for many waterproofing applications, such as swimming pools, balconies, bathrooms, wet areas, basements, roof water, roof waterproofing system in damp conditions, where other systems cannot be used, such as lift pits etc.

TECHNICAL DATA

Property Test Method Value
Component - Single
Form - Viscous Paste
Color - White
Specific Gravity ASTM D 1457 1.50 ± 0.02
Solid Contents ASTM D 1644 65% ± 3%
Drying Time - 40-50 minutes
Recoat Time - Minimum 2 Hours
Full Cure - Minimum 7 Days
Bond Strength ASTM D 4541 > 1 N / mm2 @ 28 Days
Initial water absorption BS 1881 - 5 >98% reduction over control
Crack bridging ability ASTM C 836 No Crack at 1mm thickness
Elongation ASTM D 415 >160%
UV Resistance ASTM G 53 No change in color after 300 hours

*Typical Results under laboratory conditions 

ADVANTAGES

  • Can be applied to freshly hardened concrete.
  • Excellent elongation and flexibility.
  • Exhibits crack bridging and sealing property.
  • Protection against carbonation and chlorides.
  • Excellent for damp proofing basements.
  • Excellent adhesion.
  • Easy to apply.
  • Increased frost and salt resistance

SURFACE PREPARATION 

Surface should be cleaned and sound, free from dust, loose particles, grease, oil, primers, from Previous membrane systems or bitumen. Bitumen or primers should be removed by shot blasting or mechanical means. Spalled concrete should be repaired by cutting to sound Concrete and patching with Polymer modified mortars. There are a variety of repairing mortars and crack fillers available in Ressichem Patch and Crack Heal range for the repairing of a variety of different surfaces. It is recommended to use polymer coated tape (Construction Grade) at all critical areas such as intersections, corner joints, floor/wall junctions, gaps, peripheral areas, or pipelines before the application of Water Guard 3020N. Prior to fixing the polymer coated tape, gaps and corners should be filled and leveled with an appropriate polymer modified Grout from the Ressichem range of products.

APPLICATION 

Saturate the concrete surface with clean water. Apply the first coat while the surface is still damp with no free-standing water. Apply using a short stiff bristle brush or roller at a minimum thickness of 1 mm per coat. After 2-3 hours, apply the second coat in perpendicular direction to the first coat (If the first coat has been applied in top to bottom direction, the second coat should be applied in left to right direction and vice versa). Spray or trowel application is acceptable provided the mixing ratio is adjusted to achieve the right consistency. It is recommended that for application over hollow blocks or highly porous areas, a minimum of 3 coats to total thickness of 3 mm be applied.

CURING

Water Guard 3020 N should be protected from high wind, direct sunshine, and rain until fully cured. Keep the treated area moist for 3-4 days after application

SHELF LIFE

Expiration of Water Guard 3020N is 12 months after production date under dry and sheltered conditions

PACKAGING

Water Guard 3020N is available in 15 KG and 20 KG Buckets

HEALTH & SAFETY

Water Guard 3020N is not regarded as hazardous for transportation. Do not reuse the packaging and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

Elastomeric Waterproofing

An elastomeric waterproofing membrane is made from an elastomer, a polymer with elastic properties similar to organic rubber. It has the flexibility to expand twice its original dimensions (ensuring 100% elongation) and contract to actual length to accommodate structural movements of a surface. Elastomeric waterproofing creates a solid foundation to withstand high tensile forces and abrasions.

Moreover, an elastomeric waterproof coating adds a monolithic layer to roofs and makes them cooler by reflecting sun rays. An elastomeric material is tough enough to handle construction site abuse and ensure an extended life. Ressichem offers a high-quality elastomeric waterproofing membrane in Pakistan at a modest price.