Max Flo P

Max Flo P

Max Flo P is a liquid, concrete plasticizer based on selected refined lignosulphonates and other key additives. When added to the concrete mix, it disperses the fine cement particles in the concrete mix and improves workability.

Clear
Add to wishlist
Category

    Max Flo P is a liquid, concrete plasticizer based on selected refined lignosulphonates and other key additives. When added to the concrete mix, it disperses the fine cement particles in the concrete mix and improves workability.

    STANDARD

    ASTM C 494 Type A, BS EN 934-2

    USES

    Max Flo P can be used to produce pumpable and dense concrete, it is used in both ready-mix as well as site batched concrete to produce cohesive and waterproof concrete.

    ADVANTAGES 

    • 10% – 15% water reduction effect can be obtained.
    • Water reduction significantly improves compressive strength.
    • Enhances durability through the production of low permeability concrete.
    • Effective in achieving cement reduction.
    • Good workability, better surface finish.
    • Chloride free, safe for use in prestressed reinforced concrete.
    • Minimizes the risk of segregation and bleeding.

    TYPICAL PROPERTIES 25°C

    Property Test Method Value
    Component – Single
    Form – Liquid
    Color – Dark Brown
    Specific Gravity ASTM C 494 1.16 +/- 0.02
    Air Entrainment ASTM C 231 Up to 2% over control Mix
    Chloride Content BSEN 480-10 Nil to BSEN 934-2
    pH ASTM C 494 7-9

    Typical results under laboratory conditions.

    Results may vary as per site and usage conditions

    COMPATIBILIYT

    Max Flo P can be used with all types of cements and cementitious materials like fly ash, GGBS, micro silica etc. Max Flo P should not be mixed with other additives or admixtures unless recommended by Ressichem Technician.

    DOSAGE

    Recommended dosage is 0.5% – 1.5% by weight of cementitious material like fly as, GGBS, micro silica etc. Higher dosages can be used after verification by conducting lab and site trials. Max Flo P should not be premixed with any other admixture unless Recommended by Ressichem Technician.

    EFFECT OF OVERDOSING

    Overdosing may result in higher workability and can delay in setting time. In such case, stripping time of formwork should be extended. Ultimate strength will be higher than the regular set concrete. Effects of overdosing are increased when sulphate resistant cement is used in concrete mixes.

    PACK SIZE

    Available in 1 Liter, 5 Liters, 10 Liters, 15 Liters, 25 Liters and 200 Liters of packaging.

    DISPENSING

    Max Flo P should be dispensed directly into the concrete mixer together with mixing water

    SHELF LIFE

    12 months from the date of manufacture when stored under cool and dry warehouse conditions in original unopened packaging. Extreme temperature and humidity may reduce shelf life.

    HEALTH AND SAFETY

    This product is considered as non-hazardous and safe for transportation. Suitable masks and gloves can be worn during application. Contact with skin should be avoided. Refer to product MSDS for further health and safety information.

    Packaging

    1 Ltr, 5 Ltr, 15 Ltr, 25 Ltr, 200 Ltr, 1000 Ltr
Technical Datasheet
Product Description

Max Flo P is a liquid, concrete plasticizer based on selected refined lignosulphonates and other key additives. When added to the concrete mix, it disperses the fine cement particles in the concrete mix and improves workability.

Max Flo P is a liquid, concrete plasticizer based on selected refined lignosulphonates and other key additives. When added to the concrete mix, it disperses the fine cement particles in the concrete mix and improves workability.

STANDARD

ASTM C 494 Type A, BS EN 934-2

USES

Max Flo P can be used to produce pumpable and dense concrete, it is used in both ready-mix as well as site batched concrete to produce cohesive and waterproof concrete.

ADVANTAGES 

  • 10% - 15% water reduction effect can be obtained.
  • Water reduction significantly improves compressive strength.
  • Enhances durability through the production of low permeability concrete.
  • Effective in achieving cement reduction.
  • Good workability, better surface finish.
  • Chloride free, safe for use in prestressed reinforced concrete.
  • Minimizes the risk of segregation and bleeding.

TYPICAL PROPERTIES 25°C

Property Test Method Value
Component - Single
Form - Liquid
Color - Dark Brown
Specific Gravity ASTM C 494 1.16 +/- 0.02
Air Entrainment ASTM C 231 Up to 2% over control Mix
Chloride Content BSEN 480-10 Nil to BSEN 934-2
pH ASTM C 494 7-9

Typical results under laboratory conditions.

Results may vary as per site and usage conditions

COMPATIBILIYT

Max Flo P can be used with all types of cements and cementitious materials like fly ash, GGBS, micro silica etc. Max Flo P should not be mixed with other additives or admixtures unless recommended by Ressichem Technician.

DOSAGE

Recommended dosage is 0.5% – 1.5% by weight of cementitious material like fly as, GGBS, micro silica etc. Higher dosages can be used after verification by conducting lab and site trials. Max Flo P should not be premixed with any other admixture unless Recommended by Ressichem Technician.

EFFECT OF OVERDOSING

Overdosing may result in higher workability and can delay in setting time. In such case, stripping time of formwork should be extended. Ultimate strength will be higher than the regular set concrete. Effects of overdosing are increased when sulphate resistant cement is used in concrete mixes.

PACK SIZE

Available in 1 Liter, 5 Liters, 10 Liters, 15 Liters, 25 Liters and 200 Liters of packaging.

DISPENSING

Max Flo P should be dispensed directly into the concrete mixer together with mixing water

SHELF LIFE

12 months from the date of manufacture when stored under cool and dry warehouse conditions in original unopened packaging. Extreme temperature and humidity may reduce shelf life.

HEALTH AND SAFETY

This product is considered as non-hazardous and safe for transportation. Suitable masks and gloves can be worn during application. Contact with skin should be avoided. Refer to product MSDS for further health and safety information.