Crack Heal 910

Crack Heal 910 is a high-quality filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of concrete and plasters.

Clear
Add to wishlist
Category

    Crack Heal 910 is a high-quality filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of concrete and plasters.

    ADVANTAGES

    • Fast and easy to use (Mix and apply) only addition of water is required.
    • Suitable for internal and external application
    • Excellent bonding with concrete and masonry
    • Can fill cracks up to 45 mm

    TECHNICAL DATA

    Appearance Grey Powder
    Composition of Additives Contains cement and selected aggregates along with additives to improve consistency, workability, and durability.
    Maximum Aggregate Size 3.36mm
    *Water Application 20% ± 5%
    *Wet Mix Life 45 Minutes @ 20°C (Tested as per BS EN 1015-9)
    *Compressive Strength 5.00 N / mm2 @ 28 Days (Tested as per BS EN 115-11)
    *Flexural Strength 1.00 N / mm2 @ 28 Days (Tested as per BS EN 1015-2)
    *Appropriate Yield / Coverage 0.7m3 / T

    *Typical Results under laboratory conditions 

    APPLICATION

    Remove dust, oil, grease, loose material, and paints which may affect adhesion with the substrate. Moisten the surface with clean water before application. Put appropriate amount of clean water in a suitable pot or mixing container. Add the required amount of Crack Heal 910 gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps. Let the composition stand for about 3 to 10 minutes and mix again. the product should achieve the right consistency for application. Finish it by pressing it inside the duct or void and finishing it off with a flat metal or plastic trowel. If the mortar pot starts to harden it is recommended not to add extra water, just remix till it turns back to the desired consistency.

    CURING

    No Curing Required.

    SHELF LIFE

    Expiration of Crack Heal 910 is 6 months after production date under dry and sheltered conditions

    PACKAGING

    Crack Heal 910 is available is 2 KG and 20 KG packs

    HEALTH & SAFETY

    Crack Heal 910 is not regarded hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

    Packaging

    2 KG, 20 KG
Technical Datasheet
Product Description

Crack Heal 910 is a high-quality filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of concrete and plasters.

Crack Heal 910 is a high-quality filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of concrete and plasters.

ADVANTAGES

  • Fast and easy to use (Mix and apply) only addition of water is required.
  • Suitable for internal and external application
  • Excellent bonding with concrete and masonry
  • Can fill cracks up to 45 mm

TECHNICAL DATA

Appearance Grey Powder
Composition of Additives Contains cement and selected aggregates along with additives to improve consistency, workability, and durability.
Maximum Aggregate Size 3.36mm
*Water Application 20% ± 5%
*Wet Mix Life 45 Minutes @ 20°C (Tested as per BS EN 1015-9)
*Compressive Strength 5.00 N / mm2 @ 28 Days (Tested as per BS EN 115-11)
*Flexural Strength 1.00 N / mm2 @ 28 Days (Tested as per BS EN 1015-2)
*Appropriate Yield / Coverage 0.7m3 / T

*Typical Results under laboratory conditions 

APPLICATION

Remove dust, oil, grease, loose material, and paints which may affect adhesion with the substrate. Moisten the surface with clean water before application. Put appropriate amount of clean water in a suitable pot or mixing container. Add the required amount of Crack Heal 910 gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps. Let the composition stand for about 3 to 10 minutes and mix again. the product should achieve the right consistency for application. Finish it by pressing it inside the duct or void and finishing it off with a flat metal or plastic trowel. If the mortar pot starts to harden it is recommended not to add extra water, just remix till it turns back to the desired consistency.

CURING

No Curing Required.

SHELF LIFE

Expiration of Crack Heal 910 is 6 months after production date under dry and sheltered conditions

PACKAGING

Crack Heal 910 is available is 2 KG and 20 KG packs

HEALTH & SAFETY

Crack Heal 910 is not regarded hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.